On a Continuous Reel
Revolutionary rail-mounted terminal block marking. Rail-mounted terminal blocks with a rated cross section of 2.5/4mm2 are the most commonly used in practice. WAGO WMB Inline is a revolutionary marking system that offers significant time and cost saving benefits for all WAGO rail-mounted terminal blocks designed to accept this wire range.
Individual markers designed in chain link format with extendable pitch are available on a continuous reel of 1500 or 8000 markers. A thermal transfer printer guarantees permanent and smudge-proof printing with no installation time required. The same plotter can be used for both WAGO marker cards and WMB Inline markers.
Generating the marking data is ideally performed using the appropriate WAGO software. Using "smart Designer", the marking data can be automatically generated when designing a terminal block assembly and then transferred to a thermal transfer printer. With "smart Marking", the marking data can be directly generated for printing on both thermal transfer printer and plotter.
The WMB Inline marker strip can be snapped onto the rail-mounted terminal blocks in a quick and cost effective way. Individual WMB Inline markers are used for larger terminal blocks. In addition to plain markers, standard printed markers will also be available on request. In preparation: WMB Inline with 6mm/6.2mm pitch.
Why WAGO?
• Continuous rail-mounted terminal block marking
for 5mm or
5.2mm terminal block width, for printing on a
thermal transfer printer.
• Time and cost effective design and installation.
Printing markers on a continuous reel using a thermal transfer printer. Fast marking, quick installation: WMB Inline marking system from WAGO.
