Power supply terminals
The 294 Series and 294 Linect® are power supply terminals used for connecting lighting fixtures and other devices. These terminals can be used anywhere in the world and accommodate solid, stranded and fine-stranded conductors.
Lighting connectors
Due to their testing and approval as isolated Compact Connectorss per VDE 0606, the lighting connectors of the Series 224 can be used in applications where a connection between solid and flexible conductors is required.
Block terminals
Device connecting terminals with CAGE CLAMP® S for a cost-minimizingconnection of electrical devices. Series-capable individual terminals with CAGE CLAMP® connector and fixing flanges, compact block terminal strips with CAGE CLAMP® COMPACT-connector.
Connectors
WAGO push-wire connectors for junction boxes, compact connectors for flexible conductors, connectors for EIB bus couplers.
Ballast devices and capacitor terminals
WAGO o0ffers a number of individual variants of ballast devices and capacitor terminals. A tailor-made solution will be available upon request.
PCB terminals for electronic ballast devices
With plug-in connection. Series-capable individual terminals and terminal strips for PCBs. Terminal blocks for PCBs, combination PCB terminal blocks.
Plug-in connectors for rail lighting
Plug-in connector system and plug-in connectors with phase selection for rail lighting. Blade-type connector (IDC) for the feed-through wiring and plug-in connector for lighting load circuit.
WINSTA® plug-in connectors for building installation
WINSTA® - the name is the program. Until now, the WINSTA® plug-in connector program for the building installation consisted of 3- to 5-pole plug and socket modules ...
