POWER CLAMP® 35 mm²
- 1000 V
- AWG 8 – 2
- 125 A
Jumpers
Commoning adjacent terminal blocks using centrally positioned adjacent jumpers.
Move the marking strip laterally to remove the jumper.
Voltage tap
The voltage tap is inserted into the jumper contact slot. It can be fitted with a strain relief plate and provides test option for Ø 2mm / 2.3 mm test sockets.
Label
In addition to the WSB marking system, custom marking strips can also be used.
Conductor connection
Counter-clockwise rotation using a screwdriver (blade width 5.5mm). Hold clamp in open position using the latch.
Introduce stripped wire into the clamping unit up to the stop and hold it in position . . .
. . . unlock the latch through a quick left rotation 1. After turning back the screwdriver 2. the conductor is connected safely.
