Series 790 - Busbar carriersStandard busbars (10 x 3mm and 18 x 3mm) can be accommodated on the Series 790, snap-on busbar carrier. A higher version is now available for use with the WAGO-I/O-SYSTEM components.
Frequently, 10x3mm busbars are required on both sides of the rail-mounted terminal blocks for shield application. The 790-310 (low) and 790-311 (high) busbar carriers offer a comfortable, space-saving solution with their double-sided clamping system. They are snapped onto the carrier rail - no additional assembly work is required - and they can even be used as end stops.
To loosen the busbar carrier, use pliers to relieve the spring tension.
Remove the busbar carrier using a screwdriver (blade width 5.5 mm).