Shield (Screen) Connecting System
Today's industry requires that equipment have some form of electromagnetic compatibility (EMV). Minimizing sensitivity and transmission of magnetic flux provides achieves this goal. These magnetic fluxes can cause many different types of errors (frequency converter, quicker load change, etc).
Taking measurements is the only way to detect any interfering magnetic fluxes. When they are detected, precautions need to be taken such as a good grounding of the enclosure and a large area for the shielding (skin-effect when the magnetic fluxes are at high frequency). WAGO's shield system offers a broad range of very effective products. Both the EMV and the nominal values given will be controlled within the expected range. Installation at a later date is also a simple process. The WAGO shield system is insulated and can also be used as a grounding potential.
Description
The spring material is part of the clamping saddle, giving good electrical connection and compensating for any deformation in the braiding. The system also acts as a partial strain relief.
Mounting Options Based on Application
The WAGO shield (screen) connecting system is easy to handle and has several mounting options.
Negative shield (screen) attenuation
The WAGO shield (screen) connecting system is highly effective because the clamping unit can be brought very close to the unshielded part of the cable.
Busbar carriers
The busbar carrier, which can be mounted on a DIN rail, holds the shield close to the connection point.
