Interface Modules

Separation of wiring and function level.

Nowadays when equipment is designed many scenarios need to be considered. Some of which are user and maintenance friendly, limited budgets, safety, availability, and simplicity in design and usage.

These demands are more than satisfied by the different WAGO interface modules in their various designs, such as pluggable function and interface modules, narrow relay and optocoupler modules and modern, high efficiency switched-mode power supply units.

Interface module advantages:

  • The components are pluggable - reducing installation time.
  • Exchange or adjust components easily and trouble-free.
  • Reduce costs and compact design with smaller optocouplers and relay modules.
  • Decrease error rates by exchanging modules with standardised interfaces.
 

Charging Infrastructure for eMobility

The Pilot-Box is the heart of an efficient and modern charging station, providing safe EV charging from the AC grid.
 

Current Transformers – UL Certification for Current Measurement

UL-certified 855 Series Plug-In Current Transformers join WAGO's product line for energy management applications.
 

0–140A Current Sensor

With 0–140A measurement range, WAGO's 789-621 Current Sensors are ideal for monitoring PV systems.
 

Serie 857

Multi-talented with high profile 

The perfect match of housing and electronics is the key factor for a highly successful device. This is what has been achieved by WAGO with the new transducers and relay modules of Series 857.

 

Interface Modules for System Wiring

Interface modules for 16-channel I/O modules allow for fast and space-saving connection, while simplifying installation in confined spaces. These I/O modules are equipped with flat ribbon cable connectors, offering 16 digital channels in a module less than 1⁄2 inch (12 mm) wide.
 
 

Series 859

Rail mounted terminal blocks with coupler function, 6 mm. Switching relays and optocouplers with extended input voltages and operating temperature ranges.
 
 

Series 286

Pluggable on carrier terminal blocks. Switching relays, optocouplers, temperature transducers, current flow monitoring modules and other function modules. Switching and timer relays with extended input voltages and operating temperature ranges.
 
 

Series 786

Pluggable on carrier terminal blocks. Analogue signal conditioning modules for standard signals
 
 

Series 787

In DIN-rail mountable enclosure. A/D converters, D/A converters.
 
 

Series 288, 287 and 289

Mountable on DIN 35 rail
  • Switching relays, safety relays
  • Rail-mounted modules - relay sockets
  • Gate modules, custom configured modules
  • Interface modules for initiators and actuators
 
 

Series 789

Relay modules in DIN-rail mountable enclosure
  • Switching relays.
  • Latching Relay
 
 

Series 788

Relay socket with miniature switching relay
 
 

Series 289

  • Interface Modules
  • Sub miniature D male and female connector
  • Male tab based on DIN 41651 and connectors based on DIN 41612 (Design E, F and C)
  • Siemens-SIMATIC S5 / S7, Special-purpose connectors
 

 
 
 

WAGO Kontakttechnik GmbH & Co. KG, Hansastrasse 27, D-32423 Minden, Tel ++49/571/887-0, e-mail: info@wago.com