I/O modules with pluggable field wiring
Some applications, especially in safety related fields, require a module in the fieldbus node to be exchanged without disturbing the existing wiring. For this purpose, WAGO are adding I/O modules with pluggable field wiring Series 753 to the WAGO-I/O-SYSTEM 750. A pre-wired connector that plugs into the I/O module fulfils this function. The new modules are only 1.6mm higher, the width and the depth remain the same as the existing modules.
The separation of function layer and wiring layer eliminates a source of errors during module exchange and an exchange can be accomplished much faster than with fixed wiring. At the same time the connector allows a fieldbus node to be pre-wired. Since it is possible to combine I/O modules with or without pluggable field wiring the user has the opportunity to choose the optimum type of connection for every single I/O module even within one fieldbus node. The connector allows the use of cable ties, if required, which makes it easier to bundle the wires. Direct testing aids commissioning and maintenance.
Build-in convenient solutions
The connector allows the use of cable ties, if required, which makes it easier to bundle the wires.
