Item no. 2273-208

COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 8-conductor; transparent housing; light gray cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²; transparent

Description

Advantages:
  • Convenient wiring via extremely compact design
  • Push-in termination of up to eight solid conductors
  • Cross section range: 0.5 … 2.5 mm² (18 … 14 AWG)
  • Any combination of conductor sizes is possible
  • PUSH WIRE® connection terminates solid (“s”) copper conductors

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Safety information 1:
In grounded power lines

Product details

Details

Electrical data

Ratings per IEC/EN 60664-1
Rated voltage (II / 2) 450 V
Rated impulse voltage (II / 2) 4 kV
Rated current 24 A
Legend (ratings) (II / 2) ≙ Overvoltage category II / Pollution degree 2

Connection data

Connection technology PUSH WIRE®
Actuation type Push-in
Connectable conductor materials Copper
Aluminum
Solid conductor 0.5 … 2.5 mm² / 20 … 14 AWG
Strip length 11 mm / 0.43 inch
Total number of connection points 8
Total number of potentials 1
Type of wiring Side-entry wiring

Geometrical Data

Width 18 mm / 0.709 inch
Height 10.4 mm / 0.409 inch
Depth 16.7 mm / 0.657 inch

Material Data

Color transparent
Cover color light gray
Fire load 0.039 MJ
Weight 2.2 g

Environmental Requirements

Surrounding air (operating) temperature 60 °C
Continuous operating temperature 105 °C

Commercial data

Product Group 7 (Push Wire Conn.)
Packaging type BOX
Country of origin DE
GTIN 4050821027881
Customs Tariff No. 85369010000

Approvals / Certificates

Country specific Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: VDE
VDE Prüf- und Zertifizierungsinstitut
Additional Approval Text EN 60998
Certificate name: 40029794

Ship Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: ABS
American Bureau of Shipping
Additional Approval Text -
Certificate name: 15-HG1419918-PDA
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text EN 60998
Certificate name: TAE000015T
Approval: LR
Lloyds Register
Additional Approval Text EN 60998
Certificate name: 04/20013 (E8)

Downloads

Documentation

Additional Information

CAD/CAE-Data

CAD data

2D/3D Models 2273-208

CAE data

EPLAN Data Portal 2273-208
WSCAD Universe 2273-208

Compatible products

General accessories

Item no.: 2273-500
Mounting carrier; for single- and double-row con.; 2273 Series; for DIN-35 rail mounting/screw mounting; orange
Rail / Chassis Terminal Blocks > Item no. 2273-500

Mounting carrier

PU (SPU): 50 (10) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
50
Item no.: 249-130
Syringe; Contents: 20 ml Alu-Plus contact paste
Accessories > Item no. 249-130

Syringe

PU (SPU): 20 (5) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
20

Installation Notes

4 pictures

Strip solid conductor to 11 mm / 0.43 inch (see marking).

Read more ...
1 picture

Testing via test port opposite to conductor entry.

Read more ...