Item no. 224-112

Power supply connector

Description


Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Safety information 1:
In grounded power lines

Product details

Details

Electrical data

Ratings per IEC/EN 60664-1
Rated voltage (II / 2) 400 V
Rated impulse voltage (II / 2) 4 kV
Rated current 24 A

Connection data

Connection type (1) Installation side:
Connection technology PUSH WIRE®
Actuation type Push-in
Connectable conductor materials Copper
Aluminum
Solid conductor 1 … 2.5 mm² / 16 … 14 AWG
Strip length 9 … 11 mm / 0.35 … 0.43 inch
Connection type (2) Lighting side:
Connection technology 2 CAGE CLAMP®
Number of connection points 1
Solid conductor (2) 0.5 … 2.5 mm² / 20 … 14 AWG
Total number of connection points 3
Total number of potentials 1
Type of wiring Side-entry wiring
Fine-stranded conductor (2) 0.5 … 2.5 mm² / 20 … 16 AWG

Geometrical Data

Width 9.5 mm / 0.374 inch
Height 15.5 mm / 0.61 inch
Depth 20.5 mm / 0.807 inch

Material Data

Color white
Fire load 0.046 MJ
Weight 2.066 g

Environmental Requirements

Continuous operating temperature 105 °C

Commercial data

Product Group 7 (Push Wire Conn.)
Country of origin CH
GTIN 4044918583596

Approvals / Certificates

Country specific Approvals

Approval
Additional Approval Text
Certificate name
Approval: CSA
DEKRA Certification B.V.
Additional Approval Text C22.2
Certificate name: 1053495
Approval: VDE
VDE Prüf- und Zertifizierungsinstitut
Additional Approval Text EN 60998
Certificate name: 40022792

Ship Approvals

Approval
Additional Approval Text
Certificate name
Approval: ABS
American Bureau of Shipping
Additional Approval Text -
Certificate name: 18-HG1755093-PDA
Approval: BV
Bureau Veritas S.A.
Additional Approval Text EN 60998
Certificate name: 11914/C0 BV
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text EN 60998
Certificate name: TAE000015T
Approval: LR
Lloyds Register
Additional Approval Text EN 60998
Certificate name: 04/20013 (E8)

UL-Approvals

Approval
Additional Approval Text
Certificate name
Approval: UL
UL International Germany GmbH
Additional Approval Text EN 60998
Certificate name: CCA-2617-A1
Approval: UL
UL International Germany GmbH
Additional Approval Text EN 60998
Certificate name: D-05895-A1 (EN60998-1 EN60998-2-2)
Approval: UL
UL International Germany GmbH
Additional Approval Text UL 486C
Certificate name: E69654

Downloads

Documentation

Additional Information

Technical Explainations
pdf (2.1 MB)

CAD/CAE - Smart Data

CAD data

3D Download 224-112
URL

Compatible products

General accessories

Item no.: 249-130
Syringe; Contents: 20 ml Alu-Plus contact paste