Fieldbus Coupler PROFIBUS DP; 2nd Generation; 12 MBd; light gray

Color:

Description

This buscoupler interfaces the I/O modules of the WAGO‐I/O‐SYSTEM to PROFIBUS DP.

When initializing, the buscoupler determines the module structure of the node, to create the process image in PROFIBUS. In order to optimize addresses, the I/O modules with a bit width smaller than 8 are grouped in one byte.

It is furthermore possible to deactive I/O modules and to modify the image of the node according to the connected signals without having to modify the existing application.

The diagnosis concept is based on diagnostics according to the EN 50170 standard. Therefore the programming of modules is not necessary to interpret the diagnostic information from each manufacturer.

Note:

Notice: GSD files required

Communication	PROFIBUS
Number of fieldbus nodes on the master max.	96
Max. no. of I/O points	6000
Baud rate	9.6 kBd … 12 MBd
Fieldbus segment length max.	1200 m
Transmission medium	Cu cable acc. to EN 50170
Transmission time	typ. 1 ms (10 couplers; 32 digital I/Os per coupler at 12 Mbaud) max. 3.3 ms
Number of modules per node max.	63
Input and output process image (Fieldbus) max.	244 Byte/244 Byte
System supply voltage	DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP^® connection)
Current consumption, system supply (5 V)	200 mA
Total current for system supply	1800 mA
Field supply voltage	DC 24 V (-25 … +30 %); via power jumper contacts
Input current typ. at rated load (24 V)	500 mA
Efficiency of the power supply (typ.) at nominal load (24 V)	87 %
Isolation	500 V system/supply
Number of outgoing power jumper contacts	3
Current carrying capacity of the power jumper contacts	10 A
Standard	EN 50170

Connection technology: communication/fieldbus	PROFIBUS: 1 x D-Sub 9 socket
Connection technology: field supply	6 x CAGE CLAMP^®
Connection technology: system supply	2 x CAGE CLAMP^®
Connection technology: Device configuration	1 x 4-pole male connector
Connection type (1)	System/field supply
Solid conductor	0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor	0.08 … 2.5 mm² / 28 … 14 AWG
Strip length	8 … 9 mm / 0.31 … 0.35 inch

Width	50.5 mm / 1.988 inch
Height	71.1 mm / 2.799 inch
Height from upper-edge of DIN-35 rail	63.9 mm / 2.516 inch
Depth	100 mm / 3.937 inch

Color	light gray
Housing material	Polycarbonate, polyamide 6.6
Weight	183.143
Conformity marking	CE

Surrounding air (operating) temperature	0 … 55 °C
Surrounding air (storage) temperature	-40 … 85 °C
Protection class	IP20
Degree of pollution (5)	2 per IEC 61131-2
Operating altitude	0 … 2000 m
Mounting position	horizontal (standing/lying) or vertical
Relative air humidity (no condensation)	95 %
Vibration resistance	4g per IEC 60068-2-6
Shock resistance	15g per IEC 60068-2-27
EMC immunity to interference	acc. to EN 61000-6-2, marine applications
EMC emission of interference	acc. to EN 61000-6-4, marine applications
Exposure to pollutants	Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H₂S contaminant concentration at a relative humidity 75 %	10 ppm
Permissible SO₂ contaminant concentration at a relative humidity 75 %	25 ppm

Product Group	15 (Remote I/O)
Packaging type	BOX
Country of origin	DE
GTIN	4045454526856

Fieldbus Coupler PROFIBUS DP; 2nd Generation; 12 MBd; light gray

Description

Product details

Details

Technical Data

Connection data

Geometrical Data

Mechanical data

Material Data

Environmental Requirements

Commercial data

Approvals / Certificates

Ex-Approvals

Country specific Approvals

Ship Approvals

UL-Approvals

Downloads

Documentation

Manual

Additional Information

System Description

Application Notes

Application Note CoDeSys 2.3

Application note SIEMENS

Runtime Software

Firmware

CAD/CAE-Data

CAD data

EPLAN

WSCAD

Device Files

Device Description File

Device Driver

Compatible products

Carrier rail

General accessories

Marking accessories

Shield termination

System housing

Cables and pluggable connectors

Other customers also purchased

Product family