Item no. 750-370

Fieldbus Coupler PROFINET IO; 2nd Generation

This item has been discontinued.

Description



This fieldbus coupler connects to the WAGO-I/O-SYSTEM as a slave of the PROFINET IO, the open Industrial ETHERNET standard for automation.

The fieldbus coupler supports all I/O modules. The buscoupler automatically configures, creating a local process image which may include analog, digital or specialty modules. Analog and specialty module data is sent via words and/or bytes; digital data is sent bit by bit.

This buscoupler can integrate into the application as a PROFINET IO device.

The buscoupler features an integrated 2-port switch, allowing easy line structure creation without requiring any additional network components.

The device name can be assigned via DCP protocol or be adjusted by a DIP switch if the protocol is not supported by the control systems.

Product details

Details

Technical Data

Communication PROFINET IO
Ethernet protocol DCP
SNMP
LLDP
HTTP
Device-specific PROFINET IO (RT Class 1); Conformance Class B
Baud rate -
Fieldbus segment length max. 100 m
Transmission medium Twisted Pair S-UTP; 100 Ω; Cat. 5
Number of modules per node max. 128
Number of I/O modules without bus extension max. 64
Input and output process image (Fieldbus) max. 320 Byte/320 Byte
System supply voltage DC 24 V(-15 … +20 %); via wiring level (CAGE CLAMP® connection)
Current consumption, system supply (5 V) 300 mA
Total current for system supply 1700 mA
System and sensor supply voltage )
Field supply voltage DC 24 V (-15 … +20 %); via power jumper contacts
Input current typ. at rated load (24 V) 500 mA
Efficiency of the power supply (typ.) at nominal load (24 V) 87 %
Isolation 500 V system/supply
Number of outgoing power jumper contacts 3
Current carrying capacity of the power jumper contacts 10 A

Connection data

Connection technology: communication/fieldbus PROFINET IO: 2 x RJ-45
Connection technology: field supply 6 x CAGE CLAMP®
Connection technology: system supply 2 x CAGE CLAMP®
Connection technology: Device configuration 1 x 4-pole male connector
Connection type (1) System/field supply
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Strip length 8 … 9 mm / 0.31 … 0.35 inch

Geometrical Data

Width 50.5 mm / 1.988 inch
Height 71.1 mm / 2.799 inch
Height from upper-edge of DIN-35 rail 63.9 mm / 2.516 inch
Depth 100 mm / 3.937 inch

Mechanical data

Type of mounting DIN-35 rail

Material Data

Color light gray
Housing material Polycarbonate, polyamide 6.6
Weight 189.507 g
Conformity marking CE

Environmental Requirements

Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -25 … 85 °C
Protection class IP20
Degree of pollution (5) 2 per IEC 61131-2
Operating altitude without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m
Mounting position any
Relative air humidity (no condensation) 95 %
Vibration resistance acc. to IEC 60068-2-6
Shock resistance 15g per IEC 60068-2-27
EMC immunity to interference acc. to EN 61000-6-2
EMC emission of interference acc. to EN 61000-6-3
Exposure to pollutants Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10 ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25 ppm

Commercial data

Product Group 15 (Remote I/O)
Country of origin DE
GTIN 4045454548988

Approvals / Certificates

Ex-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: ATEX
TUEV Nord Cert GmbH
Additional Approval Text EN 60079-0
Certificate name: TÜV 07 ATEX 554086 X en.
Approval: TUEV Nord
TUEV Nord Cert GmbH
Additional Approval Text IEC 60079-0
Certificate name: IECEx TUN 09.0001 X
Approval: UL
Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS)
Additional Approval Text ANSI/ISA 12.12.01
Certificate name: E198726 Sec.1

Country specific Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: KC
National Radio Research Agency
Additional Approval Text Article 58-2, Clause 3
Certificate name: MSIP-REM-W43-FBC750

UL-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: UL
UL International Netherlands B.V. (ORDINARY LOCATIONS)
Additional Approval Text UL 508
Certificate name: E175199 Sec.1

Downloads

CAD/CAE-Data

CAD data

3D Download 750-370

EPLAN

EPLAN Data Portal 750-370

WSCAD

WSCAD Universe 750-370

Compatible products

Carrier rail

Item no.: 210-112
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25 mm
Item no.: 210-113
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; according to EN 60715
Item no.: 210-114
Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; similar to EN 60715

General accessories

Marking accessories

Shield termination

System housing

Product family

750/753 Series I/O-System