PCB terminal block; Locking slides; 0.5 mm²; Pin spacing 2.5 mm; 2-pole; CAGE CLAMP®; 0,50 mm²; gray

L = (pole no. x pin spacing) + 1.5 mm

Color:

Terminal strips are just 8.1 mm tall and feature an innovative, locking slide-actuated CAGE CLAMP®
Several clamping units can be held open simultaneously
Easily terminate stranded conductors in

tight spaces (e.g., bus connectors)

Ratings per	IEC/EN 60664-1
Nominal voltage (III/3)	80 V
Rated surge voltage (III/3)	2.5 kV
Rated voltage (III/2)	160 V
Rated surge voltage (III/2)	2.5 kV
Nominal voltage (II/2)	320 V
Rated surge voltage (II/2)	2.5 kV
Rated current	6 A
Legend (ratings)	(III / 2) ≙ Overvoltage category III / Pollution degree 2

Rated voltage UL (Use Group B)	150 V
Rated current UL (Use Group B)	4 A

Rated voltage CSA (Use Group B)	150 V
Rated current CSA (Use Group B)	4 A

Connection technology	CAGE CLAMP^®
Actuation type	Slider
Solid conductor	0,08 … 0,5 mm² / 28 … 20 AWG
Fine-stranded conductor	0,08 … 0,5 mm² / 28 … 20 AWG
Fine-stranded conductor; with insulated ferrule	0,25 mm²
Fine-stranded conductor; with uninsulated ferrule	0,25 mm²
Strip length	5 … 6 mm / 0.2 … 0.24 inch
Conductor connection direction to PCB	40 °
Pole No.	2
Total number of connection points	2
Total number of potentials	2
Number of connection types	1
Number of levels	1
Note (conductor cross-section)	Terminating 0.75 mm²/18 AWG conductors is possible; however insulation diameter allows only every other clamping unit to be terminated with this conductor size.

Pin spacing	2,5 mm / 0.098 inch
Width	6,5 mm / 0.256 inch
Height	10,9 mm / 0.429 inch
Height from the surface	8,1 mm / 0.319 inch
Depth	13 mm / 0.512 inch
Solder pin length	2.8 mm
Solder pin dimensions	0,5 x 0,75 mm
Drilled hole diameter with tolerance	1,1 ^(+0,1) mm

PCB contact	THT
Solder pin arrangement	over the entire terminal strip (in-line)
Number of solder pins per potential	2

Color	gray
Material group	I
Insulation material	Polyamide 66 (PA 66)
Flammability class per UL94	V0
Clamping spring material	Chrome nickel spring steel (CrNi)
Contact material	Electrolytic copper (E_Cu)
Contact plating	tin-plated
Fire load	0.011 MJ
Weight	0.7 g

Product details