IT-Maintenance, June 1st 2025
Item no. 735-303

PCB terminal block; push-button; 1.5 mm²; Pin spacing 5 mm; 3-pole; PUSH WIRE®; gray

Item no. 735-303
PCB terminal block; push-button; 1.5 mm²; Pin spacing 5 mm; 3-pole; PUSH WIRE®; gray
Discontinued
Pole number:   3
This item has been discontinued and is no longer available as of 31/08/2027.
Item no. 735-303
PCB terminal block; push-button; 1.5 mm²; Pin spacing 5 mm; 3-pole; PUSH WIRE®; gray
Discontinued
Pole number:   3
Details
Description
Downloads
Approval
Related products
Notes
Electrical data
Connection data
Physical data
PCB contact
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 12
Item no.: 236-401
Stackable PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 1-pole; CAGE CLAMP®; commoning option; gray
Item no.: 231-438/001-000
THT male header; 1.0 x 1.0 mm solder pin; angled; Pin spacing 5 mm; 8-pole; gray
Item no.: 233-512
PCB terminal block; push-button; 0.5 mm²; Pin spacing 2.54 mm; 12-pole; CAGE CLAMP®; orange
Item no.: 236-100
End plate; 1 mm thick; snap-fit type; gray
Item no.: 236-200
End plate; 1 mm thick; snap-fit type; dark gray
Item no.: 236-300
End plate; 1 mm thick; snap-fit type; light gray
Item no.: 236-600
End plate; 1 mm thick; snap-fit type; orange
Item no.: 248-565
Mini-WSB marking card; as card; MARKED; 1 ... 9 (10x); not stretchable; Horizontal marking; snap-on type; white
Item no.: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
Item no.: 260-331
4-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 1.5 mm²; CAGE CLAMP®; gray
Item no.: 260-333
4-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 1.5 mm²; CAGE CLAMP®; light gray
Item no.: 260-334
4-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 1.5 mm²; CAGE CLAMP®; blue