PCB terminal block; lever; 16 mm²; Pin spacing 10 mm; 2-pole; CAGE CLAMP®; 16,00 mm²; gray

L = pole no. x pin spacing

Color:

High-current PCB terminal strips with lever-actuated CAGE CLAMP^® connection
Tool-free termination – fingers open/close levers
Several clamping units can be held open simultaneously – convenient for terminating multi-core cables
Four solder pins per contact point provide high mechanical stability
600 V UL for 15 mm pin spacing
Pin and dimensions compatible to high-current, screw-type terminal blocks

Ratings per	IEC/EN 60664-1
Nominal voltage (III/3)	320 V
Rated surge voltage (III/3)	4 kV
Rated voltage (III/2)	320 V
Rated surge voltage (III/2)	4 kV
Nominal voltage (II/2)	630 V
Rated surge voltage (II/2)	4 kV
Rated current	76 A
Legend (ratings)	(III / 2) ≙ Overvoltage category III / Pollution degree 2

Connection technology	CAGE CLAMP^®
Actuation type	Lever
Solid conductor	1,5 … 16 mm² / 16 … 6 AWG
Fine-stranded conductor	1,5 … 16 mm² / 16 … 6 AWG
Fine-stranded conductor; with insulated ferrule	1,5 … 10 mm²
Fine-stranded conductor; with uninsulated ferrule	1,5 … 10 mm²
Strip length	12 … 13 mm / 0.47 … 0.51 inch
Conductor connection direction to PCB	30 °
Pole No.	2
Total number of connection points	2
Total number of potentials	2
Number of connection types	1
Number of levels	1

Pin spacing	10 mm / 0.394 inch
Width	21,5 mm / 0.846 inch
Height	33,3 mm / 1.311 inch
Height from the surface	28,8 mm / 1.134 inch
Depth	30 mm / 1.181 inch
Solder pin length	4.5 mm
Solder pin dimensions	0,95 x 1,2 mm
Drilled hole diameter with tolerance	1,6 ^(+0,1) mm

PCB contact	THT
Solder pin arrangement	over the entire terminal strip (in-line)
Number of solder pins per potential	4

Color	gray
Material group	I
Insulation material	Polyamide 66 (PA 66)
Flammability class per UL94	V0
Clamping spring material	Chrome nickel spring steel (CrNi)
Contact material	Electrolytic copper (E_Cu)
Contact plating	tin-plated
Fire load	0.301 MJ
Weight	17.8 g

Product details