Item no. 750-832

Controller BACnet/IP; 4th generation; 2 x ETHERNET, SD Card Slot; light gray

The 750‐832 BACnet/IP Controller connects the WAGO I/O System to the BACnet protocol and supports the B‐BC BACnet device profile per DIN EN ISO 16484‐5. It communicates with other BACnet devices via BACnet/IP.

The controller provides the three following functionalities:
1. Native server: For each channel, appropriate BACnet objects are generated automatically for the digital and analog I/O modules that are connected to the controller.
2. Application server: Other supported BACnet objects can be created via IEC 61131‐3 programming environment and made available to a BACnet network.
3. Application client: Using the client functionality, objects and their properties can be accessed by other BACnet devices.


Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches or hubs. Both interfaces support autonegotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and may be used for IP address assignment. An integrated Webserver provides configuration options to the user, while displaying the controller's status information.
The IEC 61131-3 programmable controller is multitasking-capable and features a capacitor-backed RTC. A data memory of 8 MB is available.
The 750-832 Controller is equipped with a removable memory card slot. A memory card can be used to transfer device parameters or files (e.g., boot files) from one controller to another. The memory card can be accessed via FTP and be used as an additional drive.
The controller can process a maximum of 1000 simple BACnet objects. The actual number that can be implemented in the project can be reduced with complex object types.
Start-up and configuration of the BACnet networks is performed using the WAGO BACnet Configurator's Windows software.
Note:

The WAGO BACnet Configurator can be downloaded for free at www.wago.com.

Product details

Details
Technical Data
Communication BACnet/IP
Modbus (TCP, UDP)
ETHERNET protocols HTTP(S)
BootP
DHCP
DNS
SNTP
(S)FTP
SNMP
Visualization Web Visu
CPU 32 bits
Programming languages per IEC 61131-3 Instruction List (IL)
Ladder Diagram (LD)
Function Block Diagram (FBD), Continuous Function Chart (CFC)
Structured Text (ST)
Sequential Function Chart (SFC)
Programming environment WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
Configuration options WAGO-I/O-CHECK
BACnet Configurator
Web-based management
Baud rate (communication/fieldbus 1) 10/100 Mbit/s
Baud rate 10/100 Mbit/s
Transmission medium (communication/fieldbus) Twisted Pair S-UTP; 100 Ω; Cat. 5; 100 m maximum cable length
Transmission performance Class D per EN 50173
Program memory 8 MB
Data memory 8 MB
Non-volatile software memory 32 Kbytes
Memory card type SD and SDHC up to 32 GB (all guaranteed properties only valid with WAGO 758-879/000-001 Memory Card)
Memory card slot Push-push mechanism; Cover lid (sealable)
Number of modules per node (max.) 250
Number of modules without a bus extension (max.) 64
Input and output (fieldbus) process image (max.) 1020 Worte/1020 Worte
Device-specific BACnet device profile: B-BC (BACnet building controller); BACnet revision: 12
Indicators LED (LINK/ACT) green: Network connection via ports 1 … 2; LED (MS/BT, NS) red/green: Status of node/BACnet, network; LED (I/O, USR) red/green/orange: Local data bus status, status programmable by user; LED (A, B) green: Status of system power supply, field supply
Supply voltage (system) DC 24 V(-25 … +30 %); via pluggable connector (CAGE CLAMP® connection)
Input current (typ.) at nominal load (24 V) 500 mA
Power supply efficiency (typ.) at nominal load (24 V) 90 %
Power consumption (5 V system supply) 440 mA
Total current (system supply) 1,700 mA
Supply voltage (actuator) ,
Supply voltage (field) DC 24 V (-25 … +30 %); via power jumper contacts
Current carrying capacity (power jumper contacts) 10 A
Number of outgoing power jumper contacts 3
Isolation 500 V system/field
Connection data
Connection technology: communication/fieldbus BACnet/IP: 2 x RJ-45; Modbus TCP/UDP: 2 x RJ-45
Connection technology: system supply 2 x CAGE CLAMP®
Connection technology: field supply 6 x CAGE CLAMP®
Connection type (1) System/field supply
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Strip length 8 … 9 mm / 0.31 … 0.35 inch
Connection technology: Device configuration 1 x Male connector; 4-pole
Physical data
Width 61.5 mm / 2.421 inch
Height 100 mm / 3.937 inch
Depth 71.9 mm / 2.831 inch
Depth from upper edge of DIN-rail 64.7 mm / 2.547 inch
Mechanical data
Weight 151.8 g
Color light gray
Housing material Polycarbonate, polyamide 6.6
Environmental Requirements
Surrounding air temperature (operation) 0 … 55 °C
Surrounding air temperature (storage) -40 … 85 °C
Protection type IP20
Pollution degree (5) 2 per IEC 61131-2
Operating altitude without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); 5000 m (max.)
Relative humidity (without condensation) 95 %
Mounting position any
Mounting type DIN-35 rail
Vibration resistance 4g per IEC 60068-2-6
Shock resistance 15g per IEC 60068-2-27
EMC immunity to interference per EN 61000-6-2
EMC emission of interference per EN 61000-6-3
Exposure to pollutants Per IEC 60068-2-42 and IEC 60068-2-43
Fire load 1.142 MJ
Permissible H2S contaminant concentration at a relative humidity 75 % 10 ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25 ppm
Commercial data
Packaging type BOX
Country of origin DE
GTIN 4055143888561
Customs tariff number 85371091990
Approvals / Certificates
Ex-Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: ATEX
TUEV Nord Cert GmbH
Additional Approval Text EN 60079
Certificate name: TUEV_14_ATEX_148929_X
Approval: CCCEx
CQST/CNEx
Additional Approval Text CNCA-C23-01
Certificate name: 2020312310000213
Approval: IECEx
TUEV Nord Cert GmbH
Additional Approval Text IEC 60079
Certificate name: IECEx_TUN_14.0035_X
Approval: UL
Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS)
Additional Approval Text UL 121201
Certificate name: E198726 Sec.1
Country specific Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: KC
National Radio Research Agency
Additional Approval Text Article 58-2, Clause 3
Certificate name: MSIP-REM-W43-PFC750
Ship Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: BACnet
WSP Cert
Additional Approval Text -
Certificate name: Listing information BTL-30464
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text -
Certificate name: TAA0000194
Other Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: BACnet
WSP Cert
Additional Approval Text -
Certificate name: Listing information BTL-30464
UL-Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: UL
Underwriters Laboratories Inc. (ORDINARY LOCATIONS)
Additional Approval Text UL 61010-2-201
Certificate name: E175199 Sec11
Required accessories
Compatible products
Product family