Item no. 770-2115/007-000

Snap-in plug; with direct ground contact; 5-pole; Cod. I; 4,00 mm2; blue

Description


  • Protected against mismating and maintenance-free
  • Push-in CAGE CLAMP® spring pressure connection technology allows solid conductors to be simply pushed into a unit
  • Two-wire connection per pole for loops or bridges
  • Additional variable coding is possible

Note:


All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).


Safety information 1:
Application note for the U.S. market (USR): Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.

Product details

Details

Electrical data

Note on Contact Resistance approx. 1mΩ contact resistance approx. 0.25mΩ contact transition plug/socket
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 400 V
Rated impulse voltage (III / 3) 6 kV
Rated current 25 A
Approvals per UL 1977
Rated voltage per UL 1977 (factory wiring only) 600 V
Rated current per UL 1977 (factory wiring only) 23 A

Connection data

Connection technology Push-in CAGE CLAMP®
Actuation type Operating tool
Push-in
Nominal cross section 4 mm²
Solid conductor 0.5 … 4 mm² / 20 … 12 AWG
Solid conductor, push-in termination 1.5 … 4 mm² / 16 … 12 AWG
Stranded conductor 0.5 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor 0.5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 1.5 mm² / 20 … 16 AWG
Fine-stranded conductor with ferrule without plastic collar 0.25 … 2.5 mm² / 20 … 14 AWG
Strip length 9 mm / 0.35 inch
Note (strip length) see also packaging or instructions
Total number of connection points 10
Total number of potentials 5
Ground function with preceding GND contact
Conductor entry direction to mating direction 0 °
No. of poles 5

Geometrical Data

Pin spacing 10 mm / 0.394 inch
Width 55.5 mm / 2.185 inch
Height 18.5 mm / 0.728 inch
Depth 36 mm / 1.417 inch

Mechanical data

Coding I
Mating force of a plug-in connection approx. 20 … 70 N (depending on pole number)
Retention force of a plug-in connection When locked: > 80 N
Unmating force of a plug-in connection when unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles

200, without resistive load

100, with resistive load IN = 25 A, tested (4 mm²/AWG 12)

Gehäuseblechstärke 0.5 … 2 mm / 0.02 … 0.079 inch
Direct ground contact to DIN-rail/drilled hole/housing 1
Design with direct ground contact
Mounting type Snap-in
Marking N ⏚ L DA- DA+
Protection class IP20
Note on protection class Only in mated condition with strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)
Potential marking N ⏚ L DA- DA+
Anwendung Dimming/DALI

Plug connection

Contact type (pluggable connector) Male connector/plug
Connector connection type for conductors
Mismating protection Yes
Locking of plug-in connection locking lever
Locking lever yes

Material Data

Color blue
Insulating material Polyamide 66 (PA 66)
Flammability class per UL94 V0
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Copper or copper alloy, surface-treated
Fire load 0.382 MJ
Weight 20.922 g

Environmental Requirements

Processing temperature -5 … +40 °C
Continuous operating temperature -35 … +85 °C
Note on Continuous Service Temperature Insulating parts for temperatures ≤ 105 °C

Commercial data

Country of origin DE
GTIN 4055143594752

Approvals / Certificates

Country specific Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: CCA
DEKRA Certification B.V.
Additional Approval Text EN 61535
Certificate name: 2173495.02
Approval: CCA
DEKRA Certification B.V.
Additional Approval Text IEC 61535
Certificate name: NL-32105

Ship Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: ABS
American Bureau of Shipping
Additional Approval Text -
Certificate name: 19-HG1868589-PDA
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text -
Certificate name: TAE00001Z6
Approval: LR
Lloyds Register
Additional Approval Text IEC 61984
Certificate name: 02/20050 (E6)

UL-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: cURus
Underwriters Laboratories Inc.
Additional Approval Text UL 1977
Certificate name: E45171 Sec. 9

Downloads

CAD/CAE-Data

EPLAN

EPLAN Data Portal 770-2115/007-000

WSCAD

WSCAD Universe 770-2115/007-000

Compatible products

Cover

Item no.: 770-360
Lockout cap; for plugs; 5-pole; separable; yellow
Item no.: 770-645
Lockout cap; 5-pole; for cutouts; Plastic; black
Item no.: 770-695
Lockout cap; 5-pole; for cutouts; Plastic; white