On this page:

Product Finder

Compatible Products
MM-20032_GWA_IEK_Series_2203_2205_WAGO6481_2000x2000.jpg

Professional Building Distribution with WAGO’s TOPJOB® S Installation Rail-Mount Terminal Blocks

With WAGO’s TOPJOB® S Installation Rail-Mount Terminal Blocks with reliable Push-in CAGE CLAMP® technology, you’re prepared for future installations, even as building requirements evolve and become stricter. For the N-disconnect terminal blocks, you can choose between the variant with internal N-disconnection and N-disconnection from the N-busbar.

The Benefits for You:

  • Connect a single-phase building circuit in one terminal block width
  • Install quickly and permanently by simply inserting the solid conductors into the Push-in CAGE CLAMP®
  • Test plug with a diameter of 2 mm for direct testing
  • The right terminal block variant for any building application
  • Actuation options: Select either the operating slot or push-button variant, or choose the hybrid (both actuation methods in one terminal block)

New Product

The New Hybrid Solution

WAGO has expanded its range of TOPJOB® S Multilevel Installation Terminal Blocks and now offers an additional variant with convenient push-button actuation. Besides the choice of either an operating slot or push-button actuation, the terminal blocks also offer a hybrid model that incorporates both options.

Watch the video to learn more about our new product.

Advance Planning for Building Applications Made Easy

Product Finder for Distribution Boards in Buildings

WAGO’s new free product finger for multilevel installation terminal blocks lets you define parameters with just a few mouse clicks and then gives you a convenient automatic pre-selection of suitable terminal blocks for your building’s distribution board. Transferring completed configurations to WAGO’s Smart Designer configurator via the interface is very simple. This makes it easy to plan a building’s distribution board and tailor it to the specific application.

Product Presentation

Andreas Brettschneider, Product Manager for Installation Connectors, presents WAGO’s current product portfolio of installation rail-mount terminal blocks. You too can tailor your installation precisely to your needs.

TOPJOB® S Installation Rail-Mount Terminal Blocks

Your Solution for Building Installations

N-Disconnection with N-Disconnect Slide Link or N-Busbar

Circuit Configuration with N-Busbar

WAGO’s 2x03 and 2x05 Series Multilevel Installation Terminal Blocks with N-disconnect slide links are designed for N-disconnection using an N-busbar. The N-busbar can be connected automatically and permanently to the busbar by simply pushing on the screwless N-disconnect slide link. Available in different variants, these terminal blocks cover all practical applications and are especially suitable for the electrical installation of large circuit groups in buildings.

MM-20032_GWA_IEK_Series_2203_2205_WAGO6483_2000x1125.jpg

For Circuits without an N-Busbar

WAGO’s 2x03 Series Multilevel Installation Terminal Blocks with internal N-disconnection are designed for circuits without an N-busbar. Available in different variants, these terminal blocks are ideal for wiring smaller circuit groups, e.g., in installations with multiple ground fault potentials.

MM-20032_GWA_IEK_Series_2203_2205_WAGO6496_2000x1125.jpg

Just the Connection You Need

Highly Flexible

Choose from three actuation options: operating slot, push-button or hybrid.

Greater Clarity

Save time and money with our labeling system and label your terminal blocks with up to three lines.

Uncompromising Safety

For safe disconnection of building circuits without disconnecting the neutral conductor: perform insulation resistance measurements with the integrated N-disconnection.

Additional Compatible Products

Test plug adapter N/L; for 2003-6641 and 2003-6640 Multilevel Installation Terminal Blocks; for vertical test slot; 2-pole; gray

Item no.: 2003-499

Test plug adapter N/L ; for 2003-6641 and 2003-6640 Multilevel Installation ...

Test plug adapter N; for 2003-6641 and 2003-6640 Multilevel Installation Terminal Blocks; for vertical test slot; 1-pole; gray

Item no.: 2003-500

Test plug adapter N ; for 2003-6641 and 2003-6640 Multilevel Installation ...

Double fuse plug; for 5 x 20 mm miniature metric fuse; without blown fuse indication; 10.4 mm wide; gray

Item no.: 2003-911

Double fuse plug ; for 5 x 20 mm miniature metric fuse ; without blown fuse ...

Double fuse plug; for 5 x 20 mm miniature metric fuse; with indicator lamp; 230 V; 10.4 mm wide; gray

Item no.: 2003-911/1000-923

Double fuse plug ; for 5 x 20 mm miniature metric fuse ; with indicator lamp ; 230 ...

Busbar; tin-plated; 1000 mm long; Cu 10 mm x 3 mm; white

Item no.: 210-133

Busbar ; tin-plated ; 1000 mm long ; Cu 10 mm x 3 mm ; white

Busbar carrier; with end stop function and detachable separator plate; for DIN 35 rail; 7.5 mm thick; blue

Item no.: 2009-305

Busbar carrier ; with end stop function and detachable separator plate ; for DIN ...

Customer Applications

WAGO’s TOPJOB® S Installation Rail-Mount Terminal Blocks offer an end-to-end rail-mount terminal block system that covers all your bases, from power supply to distribution. With their wide range of features, they are the ideal interface for safe, secure, With their wide range of features, they are the ideal interface for safe, secure, state-of-the-art buildings.state-of-the-art buildings. A perfect example: the headquarters of the Joachim Herz Foundation in Hamburg.

Prefabricated Housing Electrical Installations: HUF HAUS Has a Holistic Concept of Quality

For the electrical installations in its power distribution board, renowned timber-framed prefabricated house manufacturer HUF HAUS, together with exclusive building technology supplier jb electro, relies on WAGO’s multilevel installation terminal blocks with neutral conductor disconnection.

MM-3821_MLITB reference HUF Fertighaus_HUF HAUS ART_2000x1125jpg (1).jpg