Select language
Artikelnummer 770-703

Snap-in socket; 3-pole; Cod. A; 4,00 mm²; black

Voorraadartikel
Even geduld a.u.b. ...
Catalogusprijs per stuk*
Op aanvraag
Prijs en beschikbaarheid na aanmelding
Uw prijs per stuk*
Op aanvraag
VPE (subVPE): 100 Piece
Uw ingevoerde waarde werd afgerond.
Niet bestelbaar in UVPE!
Het artikel werd uit de winkelwagen verwijderd, aangezien het zich al in de winkelwagen bevond, of in de max. hoeveelheid werd aangekocht.
Invalid input
100
  • Protected against mismating and maintenance-free
  • Push-in CAGE CLAMP® spring pressure connection technology allows solid conductors to be simply pushed into a unit
  • Two-wire connection per pole for loops or bridges
  • Additional variable coding is possible

Note:
All connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Note on mismating protection:
All WINSTA® components are 100% protected against mismating when:
a.) plugging different numbers of poles
b.) plugging while rotated 180 

c.) plugging while laterally staggered
d.) plugging one pole

Safety information 1:
Application note for the U.S. market (USR): Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.

Productdetails

Details
Electrical data
Note on Contact Resistance approx. 1 mΩ of contact resistance
 approx. 0.25 mΩ contact transition plug/socket
Ratings per IEC/EN 60664-1
Ratings per IEC/EN 60664-1
Nominal voltage (III/3) 250 V
Rated surge voltage (III/3) 4 kV
Rated current 25 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Approvals per UL 1977
Rated voltage UL 1977 600 V
Rated current UL 1977 23 A
Connection data
Connection technology Push-in CAGE CLAMP®
Actuation type Operating tool
Push-in
Nominal cross-section 4 mm²
Solid conductor 0.5 … 4 mm² / 20 … 12 AWG
Solid conductor; push-in termination 1.5 … 4 mm² / 16 … 12 AWG
Stranded conductor 0.5 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor 0.5 … 4 mm² / 20 … 12 AWG
Fine-stranded conductor; with insulated ferrule 0.25 … 1.5 mm² / 20 … 16 AWG
Fine-stranded conductor; with uninsulated ferrule 0.25 … 2.5 mm² / 20 … 14 AWG
Fine-stranded conductor; with ferrule; push-in termination 1.5 mm² / 16 AWG
Strip length 9 mm / 0.35 inch
Note (strip length) see also packaging or instructions
Pole No. 3
Total number of connection points 6
Total number of potentials 3
Conductor entry direction to mating direction 0 °
Number of test slots 3
Geometrical Data
Pin spacing 10 mm / 0.394 inch
Width 35.5 mm / 1.398 inch
Height 17.5 mm / 0.689 inch
Depth 36 mm / 1.417 inch
Mechanical data
Coding A
Mating force of a plug-in connection approx. 20 … 70 N (depending on pole number)
Retention force of a plug-in connection Locked: > 80 N
Unmating force of a plug-in connection Unlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles

200, without resistive load

100, with resistive load IN = 25 A, tested (4 mm²/AWG 12)

Housing sheet thickness 0.5 … 2 mm / 0.02 … 0.079 inch
Mounting type Snap-in
Marking L ⏚ N
Protection type IP20
Note on protection type Only when mated (these compact connectors are not designed for use in open, easily accessible areas).
Potential marking L ⏚ N
Application General mains applications
Plug connection
Contact type (pluggable connector) Female connector/socket
Connector (connection type) for conductor
Mismating protection Yes
Locking of plug-in connection locking lever
Locking lever yes
Material Data
Color black
Insulation material Polyamide 66 (PA66)
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Copper or copper alloy (surface-treated)
Fire load 0,236 MJ
Weight 11,9 g
Environmental Requirements
Processing temperature -5 … +40 °C
Continuous operating temperature -35 … +85 °C
Note on continuous operating temperature Insulating parts for temperatures ≤ 105 °C
Commercial data
Product Group 20 (WINSTA)
Packaging type BOX
Country of origin DE
GTIN 4044918252560
Customs tariff number 85366990990
Vergunningen / certificaten
Country specific Approvals
Vergunning
Norm
Certificaatsnaam
Taal
Vergunning: CCA
DEKRA Certification B.V.
Norm EN 61535
Certificaatsnaam: 2173495.02
Vergunning: CCA
DEKRA Certification B.V.
Norm IEC 61535
Certificaatsnaam: NL-32105
Ship Approvals
Vergunning
Norm
Certificaatsnaam
Taal
Vergunning: ABS
American Bureau of Shipping
Norm -
Certificaatsnaam: 19-HG1868589-PDA
Vergunning: DNV GL
Det Norske Veritas, Germanischer Lloyd
Norm -
Certificaatsnaam: TAE00001Z6
Vergunning: LR
Lloyds Register
Norm IEC 61984
Certificaatsnaam: 02/20050 (E6)
UL-Approvals
Vergunning
Norm
Certificaatsnaam
Taal
Vergunning: cURus
Underwriters Laboratories Inc.
Norm UL 1977
Certificaatsnaam: E45171 Sec. 9
Downloads
Documentation
CAD/CAE-Data
CAD data
2D/3D Models 770-703
CAE data
EPLAN Data Portal 770-703
WSCAD Universe 770-703
ZUKEN Portal 770-703
Tegenconnector
Gelieve tegenconnector en aantal te selecteren
Benodigde accessoires
Relevante producten
Gebruiksinstructies
4 Images
Conductor termination

1. Strip length, outer insulation = 35 mm (2-pole), 55 mm (3- to 5-pole)


2. Strip length = 9 mm


3. Extended ground conductor = 8 mm

Meer lezen...
1 Image
Conductor removal

To remove the conductor, actuate the clamp via screwdriver (2.5 mm blade width) and pull out the conductor.​

Meer lezen...
1 Image

Seal unused cutout with lockout cap.

Meer lezen...