Select language
Artikelnummer 857-402

Isolation amplifier; Current and voltage input signal; Bipolar current and voltage output signal; Zero/span adjustment; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²

Voorraadartikel
Even geduld a.u.b. ...
Catalogusprijs per stuk*
Op aanvraag
Prijs en beschikbaarheid na aanmelding
Uw prijs per stuk*
Op aanvraag
VPE (subVPE): 1 Piece
Uw ingevoerde waarde werd afgerond.
Niet bestelbaar in UVPE!
Het artikel werd uit de winkelwagen verwijderd, aangezien het zich al in de winkelwagen bevond, of in de max. hoeveelheid werd aangekocht.
Invalid input
1
Short description:

This signal conditioner converts standard unipolar/bipolar signals, as well as amplifies, filters and electrically isolates standard analog signals.

Features:

  • Overload protection of current input via resettable fuse
  • Zero/span adjustment across the entire measurement range (via push/slide switch)
  • Calibrated measurement range switching for all 456 signals
  • Unipolar/bipolar standard analog signals at both input/output
  • Switchable limit frequency
  • Clipping capability for analog signal limitation to output end values
  • Safe 3-way isolation with 2.5 kV test voltage per EN 61140

Productdetails

Details
Technical Data
Configuration
Configuration options DIP switch
Push/slide switch
Input
Input signal type Voltage
Current
Input signal (voltage) ±60 mV; 0 … 60 mV; ±100 mV; 0 … 100 mV; ±150 mV; 0 … 150 mV; ±300 mV; 0 … 300 mV; ±500 mV; 0 … 500 mV; ±1 V; 0 … 1 V; ±5 V; 0 … 5 V; 1 … 5 V; ±10 V; 0 … 10 V; 2 … 10 V; ±100 V; 0 … 100 V; ±200 V; 0 … 200 V
Input signal (current) ±0.3 mA; 0 … 0.3 mA; ±1 mA; 0 … 1 mA; ±5 mA; 0 … 5 mA; ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA; ±50 mA; 0 … 50 mA; ±100 mA; 0 … 100 mA
Input resistance (current input) 10 Ω (≥ 5 mA); 100 Ω (≤ 5 mA)
Input resistance (voltage input) 1 MΩ
Zero/span adjustment Adjustable via push/slide switch
Output – Analog
Output signal type Current
Voltage
Output signal (voltage) ± 5 V; 0 … 5 V; 1 … 5 V; ± 10 V; 0 … 10 V
Output signal (current) ±10 mA; 0 … 10 mA; 2 … 10 mA; ±20 mA; 0 … 20 mA; 4 … 20 mA
Load impedance (voltage output) ≥ 2 kΩ
Load impedance (current output) ≤ 600 Ω
Signal processing
Limit frequency 100 Hz / 5 kHz (configurable via DIP switch)
Step response (typ.) 3.5 ms (100 Hz); 100 µs (5 kHz)
Measurement error
Transmission error (typ.) ≤ 0.08 % of upper-range value
Temperature coefficient ≤ 0.01 %/K
Supply
Power supply type 24 VDC
Nominal supply voltage US DC 24 V
Supply voltage range ±30 %
Power consumption at nominal supply voltage ≤ 40 mA
Safety and protection
Test voltage (input/output/supply) AC 2.5 kV; 50 Hz; 1 min
Protection type IP20
Test voltage
Test voltage (input/output/supply) AC 2.5 kV; 50 Hz; 1 min
Connection data
Connection technology Push-in CAGE CLAMP®
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.34 … 2.5 mm² / 22 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch
Physical data
Width 6 mm / 0.236 inch
Height from upper-edge of DIN-rail 97.8 mm / 3.85 inch
Depth 94 mm / 3.701 inch
Mechanical data
Mounting type DIN-35 rail
Material Data
Weight 38,4 g
Environmental Requirements
Surrounding air temperature (operation) -25 … 70 °C
Surrounding air temperature (storage) -40 … 85 °C
Standards and specifications
Conformity marking CE
EMC immunity to interference EN 61000-6-2
EMC emission of interference EN 61000-6-4
Commercial data
Product Group 6 (Interface Electronics)
Packaging type bag
Country of origin DE
GTIN 4050821099772
Customs tariff number 85437090300
Downloads
Relevante producten
Gebruiksinstructies
2 Images
Configuring

Configuration via DIP switches

Meer lezen...
1 Image
Commoning

Commoning, not discrete wiring – same outline allows the use of a single in-line, push-in jumper

Meer lezen...