Item no. 727-224
4-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; for 35 x 7.5 mounting rail; 1.5 mm²; blue
Color: 
Details
Description
Downloads
Approvals
Related products
Notes
Electrical data
Connection data
Physical data
Mechanical data
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
: 2003-7646
Multilevel installation terminal block; with operating slots; 2.5 mm²; N/L/PE; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 279-325
End and intermediate plate; 2 mm thick; gray
: 279-901
2-conductor through terminal block; 1.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 1,50 mm²; gray
: 280-503/281-579
Terminal block with gas-filled surge arrester and end plate; with direct connection to DIN rail; 24 VAC/VDC
: 727-208
4-level end plate; marking: d-c-b-a--a-b-c-d; 7.62 mm thick; orange
: 2003-7642
Multilevel installation terminal block; with operating slots; 2.5 mm²; L/L; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 209-109
Edge guards; for DIN 35 rail (7.5 mm high); gray
: 210-112
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25 mm; silver-colored
: 221-413
COMPACT splicing connector; 3-conductor; with operating levers; 12 AWG; transparent housing
: 221-415
COMPACT splicing connector; 5-conductor; with operating levers; 12 AWG; transparent housing
: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 727-220
4-level terminal block for matrix patching; without locking clips; one potential per level; with 2.3 mm Ø test port; for 35 x 7.5 mounting rail; 1.5 mm²; gray
: 221-412
COMPACT splicing connector; 2-conductor; with operating levers; 12 AWG; transparent housing 
: 222-412
Splicing connector; 2-conductor; with operating levers; gray housing
: 224-112
Fixture connector; 1-pole (1x solid to 2x solid, stranded, or fine-stranded); white
: 249-117
Screwless end stop; 10 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 260-301
2-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 1.5 mm²; CAGE CLAMP®; gray
: 260-304
2-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 1.5 mm²; CAGE CLAMP®; blue: 260-306
2-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 1.5 mm²; CAGE CLAMP®; orange
: 260-361
End plate; with fixing flange; gray