Contact
PRODUCTSSOLUTIONSTRENDSCAREERSCOMPANYCUSTOMER SERVICEDOWNLOADSBLOG
Item no. 249-112

Test plug adapter; suitable for 255, 256, 257 Series PCB terminal blocks; 1-pole; Pin spacing 7.5 mm / 0.295 in; gray

1 of 3
200_0200000d00039d8a000100b6_DE200_0200000b0003f0ce000100b6_EN200_0200002500034d83000100b6_DE
Dimensions in mm
Cutting mark for separating the retaining clip and its snap-in mounting foot
Color:
Picture differs from the item.
120_0200000d00039d8a000100b6_DE120_0200000b0003f0ce000100b6_EN120_0200002500034d83000100b6_DE
Test plug adapter; suitable for 255, 256, 257 Series PCB terminal blocks; 1-pole; Pin spacing 7.5 mm / 0.295 in; gray
Test plug adapter; suitable for 255, 256, 257 Series PCB terminal blocks; 1-pole; Pin spacing 7.5 mm / 0.295 in; gray
Details
Downloads
Knowledge/FAQ
Service
Electrical data
Connection data
Physical data
Mechanical data
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 12
: 2001-1401
4-conductor through terminal block; 1.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,50 mm²; gray
: 2001-1407
4-conductor ground terminal block; 1.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,50 mm²; green-yellow
: 2001-402
Jumper; 2-way; insulated; light gray
: 2002-1491
End and intermediate plate; 0.8 mm thick; gray
: 2004-1291
End and intermediate plate; 1 mm thick; gray
: 2020-1301
2-conductor/1-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; gray
: 2020-1391
End and intermediate plate; 1 mm thick; gray
: 210-110
Fiber-tip pen
: 210-720
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured
: 249-120
Group marker carrier; white
: 280-302
End and intermediate plate; 2.5 mm thick; orange
: 280-315
End and intermediate plate; 2.5 mm thick; orange