IT-Maintenance, June 1st 2025
Item no. 857-640

Timer relay module; Nominal input voltage: 24 VDC; Limiting continuous current: 6 A; Railway; Multifunction/Multitime; Yellow status indicator; Module width: 6 mm

Item no. 857-640
Timer relay module; Nominal input voltage: 24 VDC; Limiting continuous current: 6 A; Railway; Multifunction/Multitime; Yellow status indicator; Module width: 6 mm
Regular in stock
Login
Retail purchase
Item no. 857-640
Timer relay module; Nominal input voltage: 24 VDC; Limiting continuous current: 6 A; Railway; Multifunction/Multitime; Yellow status indicator; Module width: 6 mm
Regular in stock
Login
Retail purchase
Details
Description
Downloads
Approvals
Related products
Service
Notes
Technical data
Safety and protection
Connection data
Physical data
Mechanical data
Material data
Environmental requirements
Standards and specifications
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 12
Item no.: 2002-1201
2-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray
Item no.: 2002-1292
End and intermediate plate; 0.8 mm thick; orange
Item no.: 2002-1304
3-conductor through terminal block; 2.5 mm²; for Ex e II and Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; blue
Item no.: 2002-1392
End and intermediate plate; 0.8 mm thick; orange
Item no.: 2002-402
Jumper; 2-way; insulated; light gray
Item no.: 243-131
THT single pin; silver-colored
Item no.: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
Item no.: 252-102
2-conductor female connector; push-button; PUSH WIRE®; 0.8 mm Ø; Pin spacing 3.5 mm; 2-pole; for solder pin strip; gray
Item no.: 734-534
THT female header; angled; Pin spacing 3.5 mm; 4-pole; 100% protected against mismating; 0.9 x 0.9 mm solder pin; light gray
Item no.: 750-478
2-channel analog input; 0 ... 10 VDC; Single-ended; 16 bits
Item no.: 793-5678
WMB marking card; as card; MARKED; PE (100x); stretchable 5 - 5.2 mm; Vertical marking; snap-on type; white
Item no.: 812-110
Ground busbar terminal block; for (10 x 3) mm busbars; CAGE CLAMP®; green-yellow
Prefiltered products
Sockets with a Miniature Switching Relay or a Solid-State Relay