This digital output module transmits control signals from the automation device to the connected actuators.
The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required.
The control of the semiconductor outputs is galvanically isolated from the internal system voltage.
The required load voltage is supplied via the power contacts.
The signal states for controlling the four digital outputs are indicated by status LEDs.
Notice:
A suitable supply module (e.g., 750-612) must be provided for AC operation or when using DC voltages >31.2 V!
The module has four semiconductor switches with very low on-resistance MOSFETs suitable for both AC and DC voltages. The semiconductor outputs are not permanently short-circuit proof so external fusing is required.
The control of the semiconductor outputs is galvanically isolated from the internal system voltage.
The required load voltage is supplied via the power contacts.
The signal states for controlling the four digital outputs are indicated by status LEDs.
Notice:
A suitable supply module (e.g., 750-612) must be provided for AC operation or when using DC voltages >31.2 V!