Item no. 2273-202

COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 2-conductor; transparent housing; white cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²; transparent

Stock item
Please wait ...
Stock item
List price per piece*
On request
Price and availability after Login
Your price per piece*
On request
PU (SPU): 1000 (100) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1000
Advantages:
  • Convenient wiring via an extremely compact design
  • Push-in termination of up to eight solid conductors
  • Cross-section range: 0.5 … 2.5 mm²
  • Any combination of conductor sizes is possible
  • PUSH WIRE® connection terminates solid (“s”) copper conductors

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5 mm² = 16 A
4 mm² = 22 A
Safety information 1:
in grounded power lines

Product details

Details
Electrical data
Ratings per IEC/EN 60664-1
Ratings per IEC/EN 60664-1
Nominal voltage (II/2) 450 V
Rated surge voltage (II/2) 4 kV
Rated current 24 A
Legend (ratings) (II / 2) ≙ Overvoltage category II / Pollution degree 2
Connection data
Connection technology PUSH WIRE®
Actuation type Push-in
Connectable conductor materials Copper
Aluminum
Solid conductor 0,5 … 2,5 mm² / 20 … 16 AWG
Strip length 11 mm / 0.43 inch
Total number of connection points 2
Total number of potentials 1
Wiring type Side-entry wiring
Geometrical Data
Width 10 mm / 0.394 inch
Height 5,8 mm / 0.228 inch
Depth 16,7 mm / 0.657 inch
Material Data
Color transparent
Cover color white
Flammability class per UL94 V2
Fire load 0.014 MJ
Weight 0.7 g
Environmental Requirements
Surrounding air temperature (operation) 60 … 60 °C
Continuous operating temperature 105 … 105 °C
Temperature marking per EN 60998 T60
Commercial data
Product Group 7 (Push Wire Conn.)
Packaging type BOX
Country of origin DE
GTIN 4050821027843
Customs tariff number 85369010000
Approvals / Certificates
Country specific Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: VDE
VDE Prüf- und Zertifizierungsinstitut
Additional Approval Text EN 60998
Certificate name: 40029794
Ship Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: ABS
American Bureau of Shipping
Additional Approval Text -
Certificate name: 15-HG1419918-PDA
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Additional Approval Text EN 60998
Certificate name: TAE000015T
Approval: LR
Lloyds Register
Additional Approval Text EN 60998
Certificate name: 04/20013 (E8)
Downloads
CAD/CAE-Data
CAD data
2D/3D Models 2273-202
CAE data
EPLAN Data Portal 2273-202
WSCAD Universe 2273-202
ZUKEN Portal 2273-202
Compatible products
General accessories
Item no.: 249-130
Syringe; Contents: 20 ml Alu-Plus contact paste
Accessories > Item no. 249-130
Syringe; Contents: 20 ml Alu-Plus contact paste
PU (SPU): 20 (5) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
20
Mounting adapter
Installation Notes
4 Images
Conductor termination

Strip solid conductor to 11 mm / 0.43 inch (see marking).

Read more ...
1 Image
Testing

Testing via test port opposite to conductor entry.

Read more ...