On this page:
WAGO’s power supplies More Product Areas

News
More Energy in the Field

Out of the control cabinet and into the field: WAGO's new IP67 Power Supply brings energy directly where it is needed thanks to a robust design and high degree of protection.

Even under extreme environmental conditions, WAGO's new IP67 Power Supply performs reliably while withstanding humidity and dust thanks to an IP67-grade design. The device is designed for efficiently supplying distributed loads with 24 VDC.

Advantages of IP67 Power:

  • Compact, space-saving design for on-site installation

  • Up to 92.3% efficiency for economical operation over a long service life

  • Rapid, tool-free wiring with 7/8″ screw-clamp connections

  • Active power factor correction for drawing clean sinusoidal power from the grid

  • Effective water splash protection for use in harsh industrial environments

Product Overview

Switched-mode power supply; Pro; 3-phase; 24 VDC output voltage; 20 A output current; TopBoost + PowerBoost; DC OK contact; 2,50 mm²

Item no.: 787-842

Switched-mode power supply ; Pro ; 3-phase ; 24 VDC output voltage ; 20 A output ...

Electronic circuit breaker; 8-channel; 24 VDC input voltage; adjustable 0.5 … 6 A; active current limitation; communication capability

Item no.: 787-1668/006-1000

Electronic circuit breaker ; 8-channel ; 24 VDC input voltage ; adjustable 0.5 … 6 ...

Switched-mode power supply; 1-phase; 24 VDC output voltage; 4 A output current; PowerBoost

Item no.: 787-6716

Switched-mode power supply ; 1-phase ; 24 VDC output voltage ; 4 A output current ; ...

Switched-mode power supply; Pro; 3-phase; 24 VDC output voltage; 40 A output current; TopBoost + PowerBoost; DC OK contact; 2,50 mm²

Item no.: 787-844

Switched-mode power supply ; Pro ; 3-phase ; 24 VDC output voltage ; 40 A output ...

4-conductor through terminal block; 1 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; red

Item no.: 2000-1403

4-conductor through terminal block ; 1 mm² ; suitable for Ex e II applications ; ...

Robust and Energy-Efficient, Right on Site

The primary advantage of the efficient IP67 Power Supply from WAGO is that voltage is converted from 230 VAC to 24 VDC only where direct current is needed, reducing energy costs. Ready for distributed use, the rugged and reliable IP67 power supply also saves valuable space. Designed for robustness and availability, WAGO's IP67 Power is perfect for reliable decentralized applications.

At a Glance:

  • Save space in the control cabinet
  • High energy efficiency up to 92.3%
  • Low power loss for greater availability and long service life
  • Fast, tool-free installation
  • Robust IP67 housing with water splash protection
  • Active power factor correction

WAGO’s power supplies

Efficient Power Supplies

A consistent supply voltage anytime and anywhere, in a huge range of applications – that’s what makes WAGO’s power supplies so successful!

Stromversorung_2000x1500.jpg

Product Overview

Switched-mode power supply; Pro; 3-phase; 24 VDC output voltage; 20 A output current; TopBoost + PowerBoost; DC OK contact; 2,50 mm²

Item no.: 787-842

Switched-mode power supply ; Pro ; 3-phase ; 24 VDC output voltage ; 20 A output ...

Electronic circuit breaker; 8-channel; 24 VDC input voltage; adjustable 0.5 … 6 A; active current limitation; communication capability

Item no.: 787-1668/006-1000

Electronic circuit breaker ; 8-channel ; 24 VDC input voltage ; adjustable 0.5 … 6 ...

Switched-mode power supply; 1-phase; 24 VDC output voltage; 4 A output current; PowerBoost

Item no.: 787-6716

Switched-mode power supply ; 1-phase ; 24 VDC output voltage ; 4 A output current ; ...

Switched-mode power supply; Pro; 3-phase; 24 VDC output voltage; 40 A output current; TopBoost + PowerBoost; DC OK contact; 2,50 mm²

Item no.: 787-844

Switched-mode power supply ; Pro ; 3-phase ; 24 VDC output voltage ; 40 A output ...

4-conductor through terminal block; 1 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; red

Item no.: 2000-1403

4-conductor through terminal block ; 1 mm² ; suitable for Ex e II applications ; ...

More Product Areas

Our Offer to You

Connection Technology

For fast, secure, maintenance-free connections: WAGO is your partner for all conductor types. Our product offering spans from rail-mount terminal block systems or installation and field-wiring terminal blocks, through pluggable connectors and feedthrough components, up to PCB connections and marking solutions.

katalogeinstieg_verbindungstechnik_1_ad_2000x1125_0017_2000x1500.jpg

WAGO's ECO and COMPACT Power

Learn more about ECO and COMPACT Power.

landingpage-epsitron-2000x1125.jpg