Item no. 804-102

PCB terminal block; push-button; 2.5 mm²; Pin spacing 5 mm; 2-pole; Push-in CAGE CLAMP®; 2,50 mm²; gray

Stock item
Please wait ...
Stock item
List price per piece*
On request
Price and availability after Login
Your price per piece*
On request
PU (SPU): 420 (105) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
420

  • PCB terminal strips with push-buttons and Push-in CAGE CLAMP® connection
  • Push-in termination of solid and ferruled, fine-stranded conductors
  • A large conductor entry accommodates conductors with a cross-section up to 12 AWG with an insulation diameter up to 4.2 mm
  • Terminal strips with spacers to increase pin spacing
  • Versions available with custom internal commoning (factory assembly), e.g., commoning ground conductor

Product details

Details
Electrical data
Ratings per IEC/EN 60664-1
Ratings per IEC/EN 60664-1
Nominal voltage (III/3) 250 V
Rated surge voltage (III/3) 4 kV
Rated voltage (III/2) 320 V
Rated surge voltage (III/2) 4 kV
Nominal voltage (II/2) 630 V
Rated surge voltage (II/2) 4 kV
Rated current 24 A
Legend (ratings) (III / 2) ≙ Overvoltage category III / Pollution degree 2
Approvals per UL 1059
Rated voltage UL (Use Group B) 300 V
Rated current UL (Use Group B) 10 A
Rated voltage UL (Use Group D) 300 V
Rated current UL (Use Group D) 10 A
Approvals per CSA
Rated voltage CSA (Use Group B) 300 V
Rated current CSA (Use Group B) 10 A
Rated voltage CSA (Use Group D) 300 V
Rated current CSA (Use Group D) 10 A
Connection data
Connection technology Push-in CAGE CLAMP®
Actuation type Push-button
Solid conductor 0,25 … 2,5 mm² / 20 … 12 AWG
Fine-stranded conductor 0,25 … 2,5 mm² / 22 … 12 AWG
Fine-stranded conductor; with insulated ferrule 0,25 … 1,5 mm²
Fine-stranded conductor; with uninsulated ferrule 0,25 … 2,5 mm²
Strip length 10 … 11 mm / 0.39 … 0.43 inch
Conductor connection direction to PCB 0 °
Pole No. 2
Total number of connection points 2
Total number of potentials 2
Number of connection types 1
Number of levels 1
Geometrical Data
Pin spacing 5 mm / 0.197 inch
Width 11,5 mm / 0.453 inch
Height 18,1 mm / 0.713 inch
Height from the surface 14,5 mm / 0.571 inch
Depth 15 mm / 0.591 inch
Solder pin length 3.6 mm
Solder pin dimensions 0,8 x 0,6 mm
Drilled hole diameter with tolerance 1,1 (+0,1) mm
PCB contact
PCB contact THT
Solder pin arrangement over the entire terminal strip (staggered)
Number of solder pins per potential 2
Material Data
Color gray
Material group I
Insulation material Polyamide 66 (PA 66)
Flammability class per UL94 V0
Clamping spring material Chrome nickel spring steel (CrNi)
Contact material Electrolytic copper (ECu)
Contact plating tin-plated
Fire load 0.037 MJ
Weight 2.2 g
Environmental Requirements
Limit temperature range -60 … +105 °C
Commercial data
Product Group 4 (Printed Circuit)
Packaging type BOX
Country of origin CH
GTIN 4044918514934
Customs tariff number 85369010000
Approvals / Certificates
Country specific Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: CCA
DEKRA Certification B.V.
Additional Approval Text EN 60947-7-4
Certificate name: NTR NL 7781
Approval: CCA
DEKRA Certification B.V.
Additional Approval Text EN 60947-7-4
Certificate name: 71-110710
Approval: ENEC 15
UL International Germany GmbH
Additional Approval Text EN 60998
Certificate name: ENEC-00096
UL-Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: UL
UL International Germany GmbH
Additional Approval Text UL 1059
Certificate name: 20190731-E45172
Approval: UL
UL International Germany GmbH
Additional Approval Text UL 1977
Certificate name: E45171
Compatible products
Marking accessories
Item no.: 210-332/500-202
Marking strips; as a DIN A4 sheet; MARKED; 1-16 (160x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
Marking > Item no. 210-332/500-202
Marking strips; as a DIN A4 sheet; MARKED; 1-16 (160x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
PU (SPU): 100 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
100
Item no.: 210-332/500-204
Marking strips; as a DIN A4 sheet; MARKED; 17-32 (160x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
Marking > Item no. 210-332/500-204
Marking strips; as a DIN A4 sheet; MARKED; 17-32 (160x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
PU (SPU): 100 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
100
Item no.: 210-332/500-205
Marking strips; as a DIN A4 sheet; MARKED; 1-32 (80x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
Marking > Item no. 210-332/500-205
Marking strips; as a DIN A4 sheet; MARKED; 1-32 (80x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white
PU (SPU): 100 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
100
Installation Notes
2 Images
Conductor termination

Terminating solid conductors: Simply push in stripped conductor until it hits backstop.

Read more ...
2 Images
Application

WAGO's 804 Series Terminal Strips provide "internal commoning" to meet requirements that ban routing the ground conductor over the board. This enables custom terminal strips to be commoned and ...

Read more ...
1 Image
Installation

Mixed-color terminal strips are available upon request.

Read more ...
1 Image
Installation

Terminal strips with spacer are available upon request.

Read more ...
1 Image
Marking

Labeling via self-adhesive marking strips or factory direct marking.

Read more ...
1 Image
Testing

Testing with 1 mm Ø test pin – manual touch contact.

Read more ...