Item no. 750-8202/040-000
Controller PFC200; 2 x ETHERNET, RS-232/-485; Extreme
Item no. 750-8202/040-000

Controller PFC200; 2 x ETHERNET, RS-232/-485; Extreme

Item no. 750-8202/040-000
Controller PFC200; 2 x ETHERNET, RS-232/-485; Extreme


The PFC200 Controller is a compact PLC for the modular WAGO-I/O-SYSTEM. Besides network and fieldbus interfaces, the controller supports all digital, analog and specialty modules found within the 750/753 Series.

Two ETHERNET interfaces and an integrated switch enable line topology wiring.

An integrated Webserver provides user configuration options, while displaying PFC200 status information.

Besides the processing industry and building automation, typical applications for the PFC200 include standard machinery and equipment control (e.g., packaging, bottling and manufacturing systems, as well as textile, metal and wood processing machines).

Programming per IEC 61131-3

  • Programmable via WAGO-I/O-PRO V2.3 or e!COCKPIT
  • Direct connection of WAGO I/O modules
  • 2 x ETHERNET (configurable), RS-232/-485
  • Linux operating system with RT‐Preempt patch
  • Configuration via CODESYS, e!COCKPIT or Web-Based Management user interface
  • Maintenance-free

The device is ideal for operation in extreme environments:

  • Extended temperature range
  • Greater immunity to impulse voltages and electromagnetic interference
  • Higher vibration and shock resistance

Product details


Technical Data

Communication Modbus TCP
Modbus RTU
RS-232 serial interface
RS-485 interface
Ethernet protocol DHCP
Visualization Web-Visu
Operating system Real-time Linux (with RT-Preempt patch)
CPU Cortex A8, 600 MHz
Programming languages per IEC 61131-3 Instruction List (IL)
Ladder Diagram (LD)
Function Block Diagram (FBD), Continuous Function Chart (CFC)
Structured Text (ST)
Sequential Function Chart (SFC)
Programming environment e!COCKPIT (based on CODESYS V3)
WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
Configuration options e!COCKPIT
Web-based management
Baud rate (communication/fieldbus 1) 10/100 Mbit/s
Baud rate ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus) ETHERNET: Twisted Pair S-UTP; 100 Ω; Cat. 5; Line length (max.): 100 m
Main memory (RAM) 256 MB
Internal memory (flash) 256 MB
Hardware non-volatile memory 128 kbyte
Program memory CODESYS V2: 16 MByte; e!RUNTIME: 60 MByte Program and data memory (dynamically distributed)
Data memory CODESYS V2: 64 MByte; e!RUNTIME: 60 MByte Program and data memory (dynamically distributed)
Software non-volatile memory 128 kbyte
Type of memory card SD and SDHC up to 32 GB (All guaranteed properties are only valid in connection with the WAGO 758-879/000-001 memory card.)
Memory card slot Push-push mechanism, sealable cover lid
Number of modules per node max. 64
Input and output process image (internal) max. 1000 Words/1000 Words
Input and output process image (MODBUS) max. 1000 Words/1000 Words
Indicators LED (SYS, RUN, I/O, U1 … U7) red/green/orange: Status system, program, internal data bus, status programmable by user (can be used via CODESYS library); LED (A, B) green: System power supply status, field supply
System supply voltage DC 24 V (−25 … +30 %); via wiring level (CAGE CLAMP® connection). Specified values for ambient temperatures under laboratory conditions +15 … +35 °C. For −40 … +55 °C: 24 V (−25 … +20 %). For +55 … +70 °C: 24 V (−25 … +10 %). Lower limit in all temperature ranges: −27.5 % (including 15 % residual ripple)
Input current typ. at rated load (24 V) 550 mA
Efficiency of the power supply (typ.) at nominal load (24 V) 90 %
Current consumption, system supply 510 mA
Total current for system supply 1700 mA
Field supply voltage DC 24 V; via power jumper contacts
Current carrying capacity of the power jumper contacts 10 A
Number of outgoing power jumper contacts 2
Ratings per IEC/EN 60664-1
Rated surge voltage 1 kV

Connection data

Connection technology: communication/fieldbus Modbus TCP/UDP: 2 x RJ-45; Modbus RTU: 1 x D-Sub 9 socket; RS-232 serial interface: 1 x D-Sub 9 socket; RS-485 interface: 1 x D-Sub 9 socket
Connection technology: system supply 2 x CAGE CLAMP®
Connection technology: field supply 4 x CAGE CLAMP®
Connection type (1) System-/Feldversorgung
Solid conductor 0.25 … 2.5 mm² / 24 … 14 AWG
Fine-stranded conductor 0.25 … 2.5 mm² / 24 … 14 AWG
Strip length 8 … 9 mm / 0.31 … 0.35 Inch
Connection technology: device configuration 1 x 4-pole male connector

Geometrical Data

Width 78.6 mm / 3.094 Inch
Height 71.9 mm / 2.831 Inch
Height from upper-edge of DIN-35 rail 64.7 mm / 2.547 Inch
Depth 100 mm / 3.937 Inch

Mechanical data

Weight 214 g
Color dark gray
Housing material Polycarbonate, polyamide 6.6
Conformity marking CE

Environmental Requirements

Ambient temperature (operation) -40 … 70 °C
Ambient temperature (storage) -40 … 85 °C
Degree of protection IP20
Degree of pollution (5) 2 per IEC 61131-2
Operating altitude without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m
Relative air humidity (no condensation) 95 %
Relative humidity Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation)
Mounting position horizontal (standing/lying) or vertical
Type of mounting DIN-35 rail
Vibration resistance acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373
Shock resistance acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373
EMC immunity to interference acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994
EMC emission of interference acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5
Exposure to pollutants Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity < 75 % 10 ppm
Permissible SO2 contaminant concentration at a relative humidity < 75 % 25 ppm

Commercial data

Packaging type Box
Country of rigin DE
GTIN 4055143343138
Customs Tariff No. 85371091990

Approvals / Certificates


Certificate name
Approval: ATEX
TUEV Nord Cert GmbH
Certificate name: TUEV 17 ATEX 193969X
Approval: UL
Underwriters Laboratories Inc.
Certificate name: E198726 Sec.1

Ship Approvals

Certificate name
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Certificate name: TAA00000Y7
Approval: DNV GL
Det Norske Veritas, Germanischer Lloyd
Certificate name: TAA00000Y7 Rev.1
Approval: LR
Lloyds Register
Certificate name: 17/20073 LR


Certificate name
Approval: UL
UL International Netherlands B.V.
Certificate name: E175199 Sec.1




System Manual /XTR Basic conditions and recommendations for higher operational safety
Aug 11, 2016
PDF 2.9 MB
PFC200 CS 2ETH RS/XTR PLC – PFC200 /XTR Controller
Jun 28, 2016
PDF 8.1 MB

Bid Text

Jan 19, 2016
DOC 41.5 kB


Set IP address with Ethernet Settings In this video we are demonstrating how you can set a IP address with Ethernet Settings. Content: 00:27 – Chapter #1 Download and install software; 00:56 – Chapter #2 Open Ethernet Settings; 01:10 – Chapter #3 Establish serial Connection; 01:34 – Chapter #4 Set IP address; 02:10 – Chapter #5 Check IP address
Jan 23, 2018
3.0, Jan 23, 2018
MP4 88.3 MB
Establish connection to a controller using SSH In this video we are demonstrating how to establish a SSH connec-tion with a controller using for example PuTTY to be able to work with the LINUX console. Contents: 0:21 Download and install the SSH client; 0:40 Establish the SSH connection; 0:50 Log on to the Controller
Jan 23, 2018
1.0, Jan 23, 2018
MP4 29.0 MB

Additional Information

External license agreement for open source software In Wago products
Aug 26, 2016
PDF 1.5 MB

System Description

750 XTR Series I/O-System ‒ General Product Information
Jun 6, 2017
PDF 881.2 kB



V 1.4.0 (Größe: 2,1GB), Jan 24, 2018

Runtime Software

Linux® Toolchain

Linux® Board Support Package (BSP) With the PFC BSP, WAGO offers Linux® enthusiasts the opportunity to compile the PFC firmware themselves, and to expand it according to their own wishes.

The WAGO PFC BSP includes a Pengutronix build environment, optimized for the PFC, and the OSELAS Toolchain, which open up the following possibilities, among others:

  • Expanding the firmware functions using open source packages like: Python, SQLite3, PHP, etc.
  • Compiling their own C/C++ applications with direct or indirect bus access to the local bus, CANopen, or PROFIBUS.
  • Compiling external libraries using CODESYS V2 to expand the PLC applications.
  • There are detailed instructions for many of these tasks and ideas (see How To's).
2018.2.1 (FW11), Feb 19, 2018
TXT 14.1 kB


Firmware: 750-8202/040-000 Controller PFC200; 2 x ETHERNET, RS-232/-485; Extreme
11, Jan 31, 2018
img 204.5 MB

IoT/ Cloud

Cloud Connectivity

Cloud Connectivity beta version
008, Oct 16, 2017
ZIP 8.0 MB

Compatible products

Carrier rail

General accessories

Marking accessories

shield connection

wiring and connectors

Your Shopping Cart

Added to shopping cart.
Go to the shopping cart Request offer. Continue shopping.

Are you sure?

Add project directly

Please enter an exact item number (e.g., 2002-1201) and confirm your entry with the “Enter” key. Use the “Tab” key to navigate between the columns.
Change Country

You are leaving the currently selected country website and will be logged out. Your user account only applies to one country. Your newly selected country website has other contacts and may have different content and functions.

To top of page