WAGO
| Ratings per | IEC/EN 60947-7-1 |
| Nominal voltage (III/3) | 800 V |
| Rated surge voltage (III/3) | 8 kV |
| Rated current | 32 A |
| Rated current 2 | 41 A |
| Approvals per | UL 1059 |
| Rated voltage UL (Use Group B) | 600 V |
| Rated current UL (Use Group B) | 30 A |
| Rated voltage UL (Use Group C) | 600 V |
| Rated current UL (Use Group C) | 30 A |
| Approvals per | C22.2 No 158 |
| Rated voltage CSA (Use Group B) | 600 V |
| Rated current CSA (Use Group B) | 30 A |
| Rated voltage CSA (Use Group C) | 600 V |
| Rated current CSA (Use Group C) | 30 A |
| Ratings per | ATEX: PTB 05 ATEX 1095 U / IECEx: PTB 05.0033U (Ex eb IIC Gb) |
| Rated voltage EN (Ex e II) | 550 V |
| Rated current (Ex e II) | 30 A |
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type |
Push-in
Open Tool Slot |
| Connectable conductor materials | Copper |
| Nominal cross-section | 4 mm² |
| Solid conductor | 0.5 … 6 mm² / 20 … 10 AWG |
| Width | 6.2 mm / 0.244 inch |
| Height from upper-edge of DIN-rail | 32.9 mm / 1.295 inch |
| Depth | 52.3 mm / 2.059 inch |
| Design | horizontal type |
| Mounting type | DIN-35 rail |
| Marking level | Center/side marking |
| Color | gray |
| Insulation material | Polyamide (PA66) |
| Fire load | 0.135 MJ |
| Weight | 7.1 g |
| Product Group | 22 (TOPJOB S) |
| Packaging type | BOX |
| Country of origin | DE |
| GTIN | 4017332071055 |
| Customs tariff number | 85369010000 |
All conductor types at a glance
The push-in type jumper bar system is based on the common plug and socket principle. Each terminal block is spring-loaded with a double socket and a resilient CrNi steel spring. The jumper contact ...
This star point jumper has been specially developed to create a “star point” and is used on motor terminal boards equipped with TOPJOB® S rail-mount terminal blocks.
Step-down jumpers may common terminal blocks of different sizes, without losing a conductor clamping point. This can be beneficial on long conductor runs where voltage drops may be problematic. A ...
The modular TOPJOB® S connectors also connect conductors of the same size as the terminal blocks being used.
Snapping WMB Inline markers into marker slots.
