WAGO
| Ratings per | IEC/EN 60947-7-1 |
| Nominal voltage (III/3) | 800 V |
| Rated surge voltage (III/3) | 8 kV |
| Rated current | 24 A |
| Rated current 2 | 32 A |
| Approvals per | UL 1059 |
| Rated voltage UL (Use Group B) | 600 V |
| Rated current UL (Use Group B) | 20 A |
| Rated voltage UL (Use Group C) | 600 V |
| Rated current UL (Use Group C) | 20 A |
| Approvals per | C22.2 No 158 |
| Rated voltage CSA (Use Group B) | 600 V |
| Rated current CSA (Use Group B) | 20 A |
| Rated voltage CSA (Use Group C) | 600 V |
| Rated current CSA (Use Group C) | 20 A |
| Ratings per | ATEX: PTB 03 ATEX 1162 U / IECEx: PTB 03.0004U (Ex eb IIC Gb) |
| Rated voltage EN (Ex e II) | 550 V |
| Rated current (Ex e II) | 22 A |
| Rated current (Ex e II) with jumper | 20 A |
| Connection technology | Push-in CAGE CLAMP® |
| Actuation type |
Push-in
Open Tool Slot |
| Connectable conductor materials | Copper |
| Nominal cross-section | 2.5 mm² |
| Solid conductor | 0.25 … 4 mm² / 22 … 12 AWG |
| Width | 5.2 mm / 0.205 inch |
| Height from upper-edge of DIN-rail | 32.9 mm / 1.295 inch |
| Depth | 59.2 mm / 2.33 inch |
| Design | horizontal type |
| Mounting type | DIN-35 rail |
| Marking level | Center/side marking |
| Color | gray |
| Insulation material | Polyamide (PA66) |
| Fire load | 0.13 MJ |
| Weight | 6.1 g |
| Product Group | 22 (TOPJOB S) |
| Packaging type | BOX |
| Country of origin | DE |
| GTIN | 4017332999229 |
| Customs tariff number | 85369010000 |
All conductor types at a glance
The push-in type jumper bar system is based on the common plug and socket principle. Each terminal block is spring-loaded with a double socket and a resilient CrNi steel spring. The jumper contact ...
Locate red stripes of the staggered jumpers on the inside.
Insert staggered jumper and push down until it hits backstop.
Continuous jumpers (2002 Series) readily connect an endless number of terminal blocks to each other via a single jumper slot. Use the second jumper slot for additional commoning or testing.
Step-down jumpers may common terminal blocks of different sizes, without losing a conductor clamping point. This can be beneficial on long conductor runs where voltage drops may be problematic. A ...
The modular TOPJOB® S connectors also connect conductors of the same size as the terminal blocks being used.
Snapping WMB Inline markers into marker slots.
