Product details

Details

Electrical data

Operating voltage ≤ AC/DC 100 V
Current consumption at supply voltage 0
Peak reverse voltage 100 V
Rectified current for each diode 6 A
Forward voltage for each Diode 1 V
Forward current (resistent) for each diode 6 A
Leakage current 5 µA

Safety and protection:

Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 2
Protection class IP00*
Note on protection class * Notice!Live conductors! Protection against direct contact must be provided by the equipment builder, e.g., using a WAGO 709 Series cover (see Accessories) or a similar cover. The installation requirements for the particular application must be observed.

Connection data

Connection technology CAGE CLAMP®
WAGO terminal WAGO 236 Series
Solid conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length 5 … 6 mm / 0.2 … 0.24 inch
Note (conductor cross-section) 12 AWG: THHN, THWN

Geometrical Data

Width 47 mm / 1.85 inch
Height from upper-edge of DIN-35 rail 31.5 mm / 1.24 inch
Depth 65.5 mm / 2.579 inch

Mechanical data

Type of mounting Mounting on carrier rail via carrier rail adapter
Housing design PCB

Material Data

Weight 19 g

Environmental Requirements

Surrounding air (operating) temperature -25 … 40 °C

Commercial data

Product Group 6 (Interface Electronics)
Packaging type BOX
Country of origin DE
GTIN 4045454569372
Customs Tariff No. 85369010000

Downloads

Documentation

Instruction Leaflet

CAD/CAE-Data

CAD data

2D/3D Models 289-103

CAE data

EPLAN Data Portal 289-103
WSCAD Universe 289-103

Compatible products

General accessories

Item no.: 288-001
Mounting carrier; gray
Empty Housings > Item no. 288-001

Mounting carrier; gray

PU (SPU): 50 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
50
Item no.: 288-002
Universal mounting foot; snap-fit type; suitable for DIN 15, 35 and 32 rails; gray
Accessories > Item no. 288-002

Universal mounting foot; snap-fit type; suitable for DIN 15, 35 and 32 rails; gray

PU (SPU): 100 (10) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
100

Marking accessories