PCB terminal block; lever; 6 mm²; Pin spacing 7.5 mm; 2-pole; Push-in CAGE CLAMP®; 6,00 mm²; gray

L = (pole no. - 1) x pin spacing + 10.35 mm

Color:

PCB terminal blocks with levers and Push-in CAGE CLAMP^® connection
Push-in termination of solid and ferruled conductors
Intuitive and tool-free operation
Several clamping units can be held open simultaneously – convenient for terminating multi-core cables
Testing can be performed both parallel and perpendicular to conductor entry

Ratings per	IEC/EN 60664-1
Nominal voltage (III/3)	500 V
Rated surge voltage (III/3)	6 kV
Rated voltage (III/2)	690 V
Rated surge voltage (III/2)	6 kV
Nominal voltage (II/2)	1000 V
Rated surge voltage (II/2)	6 kV
Rated current	51 A
Legend (ratings)	(III / 2) ≙ Overvoltage category III / Pollution degree 2

Connection technology	Push-in CAGE CLAMP^®
Actuation type	Lever
Solid conductor	0,2 … 10 mm² / 24 … 8 AWG
Fine-stranded conductor	0,2 … 10 mm² / 24 … 8 AWG
Fine-stranded conductor; with insulated ferrule	0,25 … 6 mm²
Fine-stranded conductor; with uninsulated ferrule	0,25 … 6 mm²
Fine-stranded conductor; with twin ferrule	0,25 … 2,5 mm²
Strip length	11 … 13 mm / 0.43 … 0.51 inch
Conductor connection direction to PCB	0 °
Pole No.	2
Total number of connection points	2
Total number of potentials	2
Number of connection types	1
Number of levels	1

Pin spacing	7,5 mm / 0.295 inch
Width	17,85 mm / 0.703 inch
Height	28 mm / 1.102 inch
Height from the surface	24 mm / 0.945 inch
Depth	24,3 mm / 0.957 inch
Solder pin length	4 mm
Solder pin dimensions	1,5 x 1,2 mm
Drilled hole diameter with tolerance	2 ^(+0,1) mm

PCB contact	THT
Solder pin arrangement	over the entire terminal strip, staggered
Number of solder pins per potential	1

Color	gray
Material group	I
Insulation material	Polyamide 66 (PA 66)
Flammability class per UL94	V0
Clamping spring material	Chrome nickel spring steel (CrNi)
Contact material	Electrolytic copper (E_Cu)
Contact plating	tin-plated
Color of actuator	orange
Weight	8.4 g

Product details