제품 번호 260-341
4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP®; gray
색상: 
제품 이미지가 실제 제품과 다를 수도 있습니다.
상세
설명
다운로드
승인
관련 제품
지식
전기적 데이터
연결 데이터
물리적 데이터
기계적 데이터
자재 데이터
환경 요구 사항
상업적 데이터
Product classification
환경 보호 준수
다른 고객이 함께 구매한 제품
1 - 4 of 20
: 260-311
2-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP®; gray
: 209-122
Plastic end stop; for WSB markers; for 210-154 aluminum rail; gray
: 210-154
Aluminum carrier rail; 1000 mm long; 18 mm wide; 7 mm high; silver-colored
: 260-371
End plate; with snap-in mounting foot; gray
: 2002-1492
End and intermediate plate; 0.8 mm thick; orange
: 2002-161
Adaptor; gray
: 2003-7641
Multilevel installation terminal block; with operating slots; 2.5 mm²; with N-disconnect slide link; NT/L/PE; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 2004-1301
3-conductor through terminal block; 4 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 4,00 mm²; gray
: 2004-1391
End and intermediate plate; 1 mm thick; gray
: 2004-410
Jumper; 10-way; insulated; light gray
: 2009-305
Busbar carrier; with end stop function and detachable separator plate; for DIN 35 rail; 7.5 mm thick; blue
: 210-148
Angled support bracket; without screw; silver-colored
: 211-855
Self-laminating labels; for Smart Printer; 9 x 18 mm; white
: 222-500
Mounting carrier; 222 Series; for DIN-35 rail mounting/screw mounting; orange
: 222-505
Strain relief plate; for mounting carrier; 221 or 222 Series, can be snapped: 260-316
2-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP®; orange
: 260-402
Jumper; for conductor entry; 2-way; insulated; gray
: 261-311
2-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
: 261-402
Jumper; for conductor entry; 2-way; insulated; gray
: 281-611/281-541
2-conductor fuse terminal block; with pivoting fuse holder; for 5 x 20 mm miniature metric fuse; with blown fuse indication by LED; 15 - 30 V; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; gray