제품 번호 734-329

Strain relief plate; for female and male connectors; 25 mm wide; 1 part; gray

1 of 2

200_020000050001599a000100b6_DE

Dimensions in mm
The arrangement of the attachments for cable ties allows single conductors or multi-core cables to be secured in different ways. The width of the cable ties must correspond to the hole dimensions of the strain relief plates shown above.

색상:

제품 이미지가 실제 제품과 다를 수도 있습니다.

120_020000050001599a000100b6_DE

상세

다운로드

승인

지식

다른 고객이 함께 구매한 제품

1 - 4 of 20

제품 번호: 734-328

Strain relief plate; for female and male connectors; 12.5 mm wide; 1 part; gray

제품 번호: 2022-152

Locking lever; orange

제품 번호: 249-116

Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray

제품 번호: 2022-171

Center module for 1-conductor female connector; Push-in CAGE CLAMP®; 4 mm²; Pin spacing 5.2 mm; 1-pole; 4,00 mm²; gray

제품 번호: 249-119

Group marker carrier; gray

제품 번호: 2022-161

Start module for 1-conductor female connector; Push-in CAGE CLAMP®; 4 mm²; Pin spacing 5.2 mm; 1-pole; with integrated end plate; 4,00 mm²; gray

제품 번호: 734-430

Strain relief plate; for female and male connectors; 1 part; gray

제품 번호: 2002-402

Jumper; 2-way; insulated; light gray

제품 번호: 2020-1201

1-conductor/1-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; gray

제품 번호: 2020-1291

End and intermediate plate; 1 mm thick; gray

제품 번호: 2020-2231

1-conductor/1-pin double deck receptacle terminal block; Through/through terminal block; L/L; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; gray

제품 번호: 734-327

Strain relief plate; for female and male connectors; 6 mm wide; 1 part; gray

제품 번호: 2000-115

Protective warning marker; for 5 terminal blocks; with high-voltage symbol, black; yellow

제품 번호: 2000-1401

4-conductor through terminal block; 1 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; gray

제품 번호: 2000-1407

4-conductor ground terminal block; 1 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 1,00 mm²; green-yellow

제품 번호: 2000-1491

End and intermediate plate; 0.7 mm thick; gray

제품 번호: 2000-403

Jumper; 3-way; insulated; light gray

제품 번호: 2000-436

Jumper; from 1 to 6; insulated; light gray

제품 번호: 2002-1401

4-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray

제품 번호: 2002-1407

4-conductor ground terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; green-yellow