제품 번호 857-809
Potentiometer signal conditioner; Current and voltage output signal; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²
1 of 9
상세
설명
다운로드
승인
관련 제품
지식
참조
기술 데이터
안전 및 보호
연결 데이터
물리적 데이터
기계적 데이터
자재 데이터
환경 요구 사항
표준 및 사양
상업적 데이터
Product classification
환경 보호 준수
다른 고객이 함께 구매한 제품
: 750-1405
16-channel digital input; 24 VDC; 3 ms
: 788-312
Relay module; Nominal input voltage: 24 VDC; 2 changeover contacts; Limiting continuous current: 8 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray
: 750-600
End Module
: 858-304
Relay module; Nominal input voltage: 24 VDC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Red status indicator; Module width: 31 mm; 1,50 mm²
: 249-119
Group marker carrier; gray
: 709-581
Switchgear cabinet outlet; for DIN-rail and screw mounting; for plug, type F, CEE 7/4 (Schuko); common in DE, NL, AT; with LED status indicator; with Push-in Cage Clamp double connection; light gray
: 788-516
Relay module; Nominal input voltage: 230 VAC; 2 changeover contacts; Limiting continuous current: 8 A; Red status indicator; Module width: 15 mm; 2,50 mm²; gray
: 2002-1301
3-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 2002-3291
End and intermediate plate; 0.8 mm thick; gray
: 2002-403
Jumper; 3-way; insulated; light gray
: 2006-1301
3-conductor through terminal block; 6 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray
: 2007-8442
Adjacent jumper for switching lever; 2-way; insulated; orange
: 2007-8892
End plate; 1.5 mm thick; without lock-out seal option; orange
: 2002-1391
End and intermediate plate; 0.8 mm thick; gray
: 2002-402
Jumper; 2-way; insulated; light gray
: 2002-404
Jumper; 4-way; insulated; light gray
: 2006-402
Jumper; 2-way; insulated; light gray
: 2007-8821
2-conductor disconnect/test terminal block; e.g., current transformer circuits; with receptacle for adjacent jumper with switch lever; for 4 mm Ø test plugs; for DIN-rail 35 x 15 and 35 x 7.5; 6 mm²; Push-in CAGE CLAMP®; 6,00 mm²; gray
: 2202-1201
2-conductor through terminal block; with push-button; 2.5 mm²; with test port; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray