Contact
PRODUCTSSOLUTIONSTrendsCOMPANYCUSTOMER SERVICEDOWNLOADSCatalogs
Item no. 256-402

PCB terminal block; push-button; 2.5 mm²; Pin spacing 5/5.08 mm; 2-pole; CAGE CLAMP®; commoning option; gray

1 of 3
200_14532106_DE200_0200000f0002f495000100b6_EN200_020000240001a91a000100b6_DE
Dimensions in mm
L = (pole no. x pin spacing) + 2.9 mm
Color:
Picture differs from the item.
120_14532106_DE120_0200000f0002f495000100b6_EN120_020000240001a91a000100b6_DE
PCB terminal block; push-button; 2.5 mm²; Pin spacing 5/5.08 mm; 2-pole; CAGE CLAMP®; commoning option; gray
PU (SPU): 400 (100) Piece
PCB terminal block; push-button; 2.5 mm²; Pin spacing 5/5.08 mm; 2-pole; CAGE CLAMP®; commoning option; gray
PU (SPU): 400 (100) Piece
Details
Description
Downloads
Approvals
Related products
Knowledge/FAQ
Notes
Electrical data
Connection data
Physical data
PCB contact
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
: 261-301
2-conductor terminal block; without push-buttons; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
: 249-117
Screwless end stop; 10 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 282-101
2-conductor through terminal block; 6 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 6,00 mm²; gray
: 282-402
Jumper; insulated; gray
: 770-505/023-000
Strain relief housing; 5-pole; for 2 cables; 5.0 … 9.0 mm; 55 mm; black
: 793-502
WMB marking card; as card; MARKED; 1 ... 10 (10x); not stretchable; Horizontal marking; snap-on type; white
: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 279-344
End and intermediate plate; 2 mm thick; gray
: 282-301
End and intermediate plate; 4 mm thick; gray
: 2002-1291
End and intermediate plate; 0.8 mm thick; gray
: 216-202
Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; gray
: 224-112
2-conductor lighting connector; push-button on lighting side; Lighting side: for all conductor types; Inst. side: for solid conductors; 224 Series; max. 2.5 mm²; Surrounding air temperature: max 60°C; 2,50 mm²; white
: 250-502
PCB terminal block; push-button; 1.5 mm²; Pin spacing 5 mm; 2-pole; Push-in CAGE CLAMP®; gray
: 261-361
End plate; with fixing flange; gray
: 279-402
Jumper; insulated; gray
: 279-831
4-conductor through terminal block; 1.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 1,50 mm²; gray
: 210-658
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured
: 210-722
Operating tool set with partially insulated shaft; Type 1, blade (2.5 x 0.4) mm; Type 2, blade (3.5 x 0.5) mm; Type 3, blade (5.5 x 0.8) mm
: 211-501/000-002
Shrink tube; for Smart Printer; Unshrunk diameter: 3.2 mm; yellow
: 216-203
Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; red