Contact
PRODUCTSSOLUTIONSTrendsCOMPANYCUSTOMER SERVICEDOWNLOADSCatalogs
Item no. 750-979/000-013

Connector PROFINET; RJ-45; Cat. 6A; angled; AWG 22; Strain relief

1 of 3
200_020000250003d778000100b6_DE200_020000260000008e000100b6_EN200_020000040003c7ac000600b6_DE
120_020000250003d778000100b6_DE120_020000260000008e000100b6_EN120_020000040003c7ac000600b6_DE
Item no. 750-979/000-013
Connector PROFINET; RJ-45; Cat. 6A; angled; AWG 22; Strain relief
PU (SPU): 1 Piece
Item no. 750-979/000-013
Connector PROFINET; RJ-45; Cat. 6A; angled; AWG 22; Strain relief
PU (SPU): 1 Piece
Details
Downloads
Approvals
Technical data
Connection data
Physical data
Mechanical data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
: 750-977/000-013
Connector PROFINET; RJ-45; Cat. 6A; straight; AWG 22
: 206-1204
Variocrimp 4 crimping tool; for insulated and uninsulated ferrules; Crimping range: 0.25 to 4.0 mm²
: 206-1403
Cable knife; for Ø 8 mm … 28 mm / 0.31" … 1.10"; with intelligent bracket change system
: 209-106
Mounting carrier; for isolated mounting on DIN 35 rails; gray
: 210-148
Angled support bracket; without screw; silver-colored
: 210-658
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured
: 210-722
Operating tool set with partially insulated shaft; Type 1, blade (2.5 x 0.4) mm; Type 2, blade (3.5 x 0.5) mm; Type 3, blade (5.5 x 0.8) mm
: 216-201
Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; electrolytic copper; acc. to DIN 46228, Part 4/09.90; white
: 216-203
Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; red
: 249-117
Screwless end stop; 10 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 280-308
End and intermediate plate; 2.5 mm thick; gray
: 280-402
Jumper; insulated; gray
: 280-519
Double-deck terminal block; Through/through terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray/gray
: 280-564
2-conductor sensor supply terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
: 280-580
4-conductor sensor terminal block; with colored conductor entries; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
: 284-601
2-conductor through terminal block; 10 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 10,00 mm²; gray
: 289-175/790-108
Interface module; RJ-45; PCB terminal blocks, double-row; Cat. 5; in mounting carrier; with shield connection; with shield clamping saddle
: 704-5024
Interface module for system wiring; Pluggable connector per DIN 41651; Male connector; 20-pole; 16-channel relay output; 1 changeover contact; Triple-deck PCB terminal blocks; in mounting carrier; 2,50 mm²
: 750-530
8-channel digital output; 24 VDC; 0.5 A
: 750-977/000-022
Connector ETHERNET; RJ-45; Cat. 6A; straight; Code T568B; AWG 24