Contact
PRODUCTSSOLUTIONSTrendsCOMPANYCUSTOMER SERVICEDOWNLOADSCatalogs
Item no. 857-531

Threshold value switches; Analog values; 1 changeover contact; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²

1 of 10
200_11573140_DE200_11573136_DE200_11573146_DE200_11573143_DE200_0200000a0001b8af000100b6_DE200_0200001c000113b7000100b6_EN
DC load limit curve
200_0200002400032c85000100b6_EN
Current-carrying capacity curve
200_0200000200015033000300b6_EN200_0200000c00016632000100b6_EN
120_11573140_DE120_11573136_DE120_11573146_DE120_11573143_DE120_0200000a0001b8af000100b6_DE120_0200001c000113b7000100b6_EN120_0200002400032c85000100b6_EN120_0200000200015033000300b6_EN120_0200000c00016632000100b6_EN
Threshold value switches; Analog values; 1 changeover contact; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²
Threshold value switches; Analog values; 1 changeover contact; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²
Details
Description
Downloads
Approvals
Related products
Notes
Technical data
Safety and protection
Connection data
Physical data
Mechanical data
Material data
Environmental requirements
Standards and specifications
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
: 787-732
Power supply; Eco; 1-phase; 24 VDC output voltage; 10 A output current; DC-OK LED; 4,00 mm²
: 789-329
Relay module; Nominal input voltage: 24 VDC; 1 changeover contact; Limiting continuous current: 12 A; for lamp loads; Manual/0FF/Auto switch; Red status indicator; Module width: 18 mm
: 2002-1201
2-conductor through terminal block; 2.5 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 2,50 mm²; gray
: 2009-115
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white
: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
: 236-401
Stackable PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 1-pole; CAGE CLAMP®; commoning option; gray
: 249-119
Group marker carrier; gray
: 261-304
2-conductor terminal block; without push-buttons; suitable for Ex i applications; with fixing flange; 1-pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; blue
: 261-361
End plate; with fixing flange; gray
: 282-432
Jumper; 2-way; insulated; orange
: 282-433
Jumper; 3-way; insulated; orange
: 285-134
2-conductor through terminal block; 35 mm²; lateral marker slots; only for DIN 35 x 15 rail; POWER CAGE CLAMP; 35,00 mm²; blue
: 285-135
2-conductor through terminal block; 35 mm²; lateral marker slots; only for DIN 35 x 15 rail; POWER CAGE CLAMP; 35,00 mm²; gray
: 709-581
Switchgear cabinet outlet; for DIN-rail and screw mounting; for plug, type F, CEE 7/4 (Schuko); common in DE, NL, AT; with LED status indicator; with Push-in Cage Clamp double connection; light gray
: 709-582
Switchgear cabinet outlet; for DIN-rail and screw mounting; for plug, type F, CEE 7/4 (Schuko); common in DE, NL, AT; with LED status indicator; with Push-in Cage Clamp double connection; signal yellow
: 750-1415
8-channel digital input; 24 VDC; 3 ms; 2-conductor connection
: 750-450
4-channel analog input; Resistance measurement; Adjustable
: 750-456
2-channel analog input; ±10 VDC; Differential input
: 750-494
3-Phase Power Measurement; 480 VAC, 1 A
: 750-497
8-channel analog input; 0 … 10 V/±10 VDC; Single-ended