Item no. 279-433
Operating tool; made of insulating material; 3-way
Details
Downloads
Technical data
Physical data
Mechanical data
Material data
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
: 2000-5311
3-conductor sensor terminal block; with colored conductor entries; 1 mm²; Push-in CAGE CLAMP®; 1,00 mm²; gray
: 2000-5391
End and intermediate plate; 1 mm thick; for 3-conductor terminal blocks; gray
: 2004-402
Jumper; 2-way; insulated; light gray
: 2006-1201
2-conductor through terminal block; 6 mm²; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray
: 210-803
Type labels; 99 x 44 mm; white
: 210-811/000-002
Textile labels; for Smart Printer; permanent adhesive; 7 x 20 mm; 3000 pieces on roll; yellow
: 221-413
Splicing connector with levers; for all conductor types; max. 4 mm²; 3-conductor; transparent housing; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
: 236-332
Operating tool; natural
: 243-131
THT single pin; silver-colored
: 249-119
Group marker carrier; gray
: 250-202
PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 2-pole; Push-in CAGE CLAMP®; gray
: 279-432
Operating tool; made of insulating material; 2-way
: 285-139
Three phase set; with 35 mm² high-current tbs; only for DIN 35 x 15 rail; copper; 35 mm²; POWER CAGE CLAMP; 35,00 mm²; gray/blue/green-yellow
: 734-190
Combination operating tool; natural
: 750-1405
16-channel digital input; 24 VDC; 3 ms
: 750-613
System Power Supply; 24 VDC
: 750-627
Bus Extension End Module
: 750-643
MP-Bus Master
: 753-647
DALI Multi-Master
: 793-5507
WMB marking card; as card; MARKED; 51 ... 100 (2x); stretchable 5 - 5.2 mm; Horizontal marking; snap-on type; white