WAGO’s signal conditioners and isolation amplifiers keep a uniform profile within cabinets. This allows easy commoning of the supply voltage, eliminating the need for time-consuming wiring of individual components.
Your Benefits:
Product Overview
Various Combination Options
At a glance
Various functions for a wide range of applications:
Isolation Amplifiers
Isolate, amplify, filter or convert: WAGO’s isolation amplifiers handle a large number of functions in industrial applications and provide secure and error-free signal transmission.
The range of isolation amplifiers provides the right solution for every application:
Your benefits with WAGO's isolation amplifiers:
Frequency Signal Conditioners
WAGO’s frequency signal conditioners record 0.1 kHz to 120 kHz signals from NAMUR, NPN or PNP sensors and convert the frequency into an analog standard signal.
Your benefits with WAGO's frequency signal conditioners:
Temperature Signal Conditioners
With WAGO’s temperature signal conditioners, signals from Pt, TC, Ni, KTY and RTD sensors and resistors can be recorded and converted into an analog standard signal on the output side. Whether a resistive temperature device or a thermocouple is used depends on factors such as the maximum temperature range, the installation’s environment and the required measurement accuracy:
The benefits of our temperature signal conditioners for you:
Threshold Value Switches
WAGO’s threshold value switches monitor various measurement signals such as temperature, current or voltage. If a value falls above or below a limiting value setting, emergency stops or alarms can be triggered, for example. In addition to threshold value switches for analog signals, WAGO also offers RTD threshold value switches for resistance temperature sensors and potentiometers, as well as TC threshold value switches for thermocouples, allowing both signal monitoring and measurement.
Your benefits with WAGO's threshold value switches:
Potentiometer Signal Conditioners
WAGO’s potentiometer signal conditioner records resistance signals (e.g., from potentiometers) and converts them into a standard analog signal.
Your benefits with WAGO's potentiometer signal conditioners:
Current, Voltage and Power Signal Conditioners
Besides current and voltage signal conditioners which record DC and AC currents and voltages, this impressive range also includes a power measurement module that can measure current and voltage in parallel, convert them to power and output them as an analog standard signal. Additionally, WAGO’s signal conditioner for Rogowski coils offers a solution for retrofitting existing systems. Thus it is not necessary to disconnect the live conductor. Das 3-Phasen-Leistungsmessmodul ermöglicht die Messung relevanter Parameter, wie Spannung, Strom, Leistung und Oberwellen im dreiphasigen Versorgungsnetz, direkt im Schaltschrank.
The benefits of our current, voltage and power signal conditioners for you:
3-Phase Power Measurement Modules
With the WAGO three-phase power measurement module in a DIN-rail-mount enclosure, WAGO offers the ideal solution – remotely from the control level – to measure currents and voltages in a three-phase supply network. Measured variables such as active/apparent/reactive power, energy consumption, power factor, phase angle and frequency can be accessed via Modbus® interface. Two integrated RJ-45 sockets streamline the interconnection of up to 32 devices.
Your Benefits:
Isolate, amplify, filter or convert: WAGO’s isolation amplifiers handle a large number of functions in industrial applications and provide secure and error-free signal transmission.
The range of isolation amplifiers provides the right solution for every application:
Your benefits with WAGO's isolation amplifiers:
WAGO’s frequency signal conditioners record 0.1 kHz to 120 kHz signals from NAMUR, NPN or PNP sensors and convert the frequency into an analog standard signal.
Your benefits with WAGO's frequency signal conditioners:
With WAGO’s temperature signal conditioners, signals from Pt, TC, Ni, KTY and RTD sensors and resistors can be recorded and converted into an analog standard signal on the output side. Whether a resistive temperature device or a thermocouple is used depends on factors such as the maximum temperature range, the installation’s environment and the required measurement accuracy:
The benefits of our temperature signal conditioners for you:
WAGO’s threshold value switches monitor various measurement signals such as temperature, current or voltage. If a value falls above or below a limiting value setting, emergency stops or alarms can be triggered, for example. In addition to threshold value switches for analog signals, WAGO also offers RTD threshold value switches for resistance temperature sensors and potentiometers, as well as TC threshold value switches for thermocouples, allowing both signal monitoring and measurement.
Your benefits with WAGO's threshold value switches:
WAGO’s potentiometer signal conditioner records resistance signals (e.g., from potentiometers) and converts them into a standard analog signal.
Your benefits with WAGO's potentiometer signal conditioners:
Besides current and voltage signal conditioners which record DC and AC currents and voltages, this impressive range also includes a power measurement module that can measure current and voltage in parallel, convert them to power and output them as an analog standard signal. Additionally, WAGO’s signal conditioner for Rogowski coils offers a solution for retrofitting existing systems. Thus it is not necessary to disconnect the live conductor. Das 3-Phasen-Leistungsmessmodul ermöglicht die Messung relevanter Parameter, wie Spannung, Strom, Leistung und Oberwellen im dreiphasigen Versorgungsnetz, direkt im Schaltschrank.
The benefits of our current, voltage and power signal conditioners for you:
With the WAGO three-phase power measurement module in a DIN-rail-mount enclosure, WAGO offers the ideal solution – remotely from the control level – to measure currents and voltages in a three-phase supply network. Measured variables such as active/apparent/reactive power, energy consumption, power factor, phase angle and frequency can be accessed via Modbus® interface. Two integrated RJ-45 sockets streamline the interconnection of up to 32 devices.
Your Benefits:
The 3-in-1 Solution – in One Device
New 1-Phase Power Measurement Module for Current, Voltage and Power Measurement
The new single-phase power measurement module is a true multi-talent that directly measures both DC and AC currents up to 8 A, as well as DC and AC voltages up to 500 V. Furthermore, measured variables such as current, voltage, all types of power (3-in-1) and many more can be flexibly configured and evaluated – in the configuration software or directly on the device display. Therefore, this new module allows many current and voltage measurement requirements to be met in both industrial and transportation applications.
It also monitors, reports and displays signal statuses with up to two switching thresholds and provides these statuses to a higher-level PLC via an analog or serial interface. For use of this power measurement module as a current, voltage or power threshold switch, a relay and digital output are integrated.
Your Benefits:
Intuitive configuration via software, app or display
Interface Configuration Software
The signal conditioners are all user-friendly and easy to configure using WAGO's interface configuration software.
Configuration Display
WAGO's 2857-0900 Removable Display can be quickly and easily attached to the housing. This unique feature includes an innovative touch panel for intuitively configuring devices. The multicolor display changes between orange, red, green or white depending on the 2857 Series’ current status. Integrated capabilities, such as the copy function, can transmit stored configuration data from one device to another of the same type. Passwords for protecting configured data may be assigned to prevent unauthorized access and changes.
Configuration App
The free JUMPFLEX®-ToGo App brings the power of PC-based configuration software to your Android mobile device.
Discover all our signal conditioners and isolation amplifiers.
Discover the extensive features of JUMPFLEX® Signal Conditioners and Isolation Amplifiers, which simplify day-to-day jobs with streamlined commissioning and operation.
This May Also Interest You
Related Topics and Products
Saving energy is good for the environment and for business. Performing the right analysis and taking the right steps can lead to sustainable profit. WAGO is your partner for effective energy management.
The innovative configuration options via the software, app or display provide essential support for commissioning, service and maintenance for your process technology systems.
Find a wholesaler near you.
Energy Management
:
Recommended Reading
Discover Our Other Product Ranges
For fast, secure, maintenance-free connections: WAGO is your partner for all conductor types. Our product selection runs from rail-mount terminal block systems, to installation and field-wiring terminal blocks, to pluggable connectors and feedthrough components, to PCB connections and marking solutions.
Measurement, control, regulation: WAGO’s automation technology and associated software are future-ready and save time. Our I/O systems, controllers, displays and panels are distinguished by the highest level of reliability – even under extreme conditions.
