[{"term":"Libraries_BA","id":0,"type":"QUICKLINKS"},{"term":"Instructions","id":1,"type":"QUICKLINKS"},{"term":"WAGO-I/O-PRO","id":2,"type":"QUICKLINKS"},{"term":"Building","id":3,"type":"QUICKLINKS"},{"term":"221","id":4,"type":"QUICKLINKS"}]
{ "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Homepage", "item": "https://www.wago.com/tr-en" }, { "@type": "ListItem", "position": 2, "name": "Products", "item": "https://www.wago.com/tr-en/products" }, { "@type": "ListItem", "position": 3, "name": "MP-Bus", "item": "https://www.wago.com/tr-en/mp-bus" } ] } [{"url":"/products","name":"Products","linkClass":null,"categoryCode":null},{"url":"/mp-bus","name":"MP-Bus","linkClass":"active","categoryCode":null}]
Topics

Control According to Sensors: MP-Bus

The MP-Bus controls HVAC actuators for dampers, regulator valves or VAV air volume controls.

The actuators have connections for sensors (temperature, humidity, ON/OFF switches), which are also accessible via MP-Bus.

System features:

  • Actuation of up to eight drives possible from MP-Master via the M-Bus.
  • It is possible to connect one active or passive sensor and one switch to the MFT2/MP drive.
  • No line topology limitations: Star, ring, tree or mixed configurations are possible.
  • Data exchange between master and slaves is possible, e.g.: absolute/relative volumetric flow, minimum/maximum limits, angular position, sensor value, operating status and fault messages.

Your contact person at WAGO

Additional service offerings:

Products

The Standard for Motor Control: SMI

The “Standard Motor Interface” (SMI) is the standardized electrical interface for roller shutter and sunblind drives.

logo_smi_standard-motor-interface_2000x1500.jpg