在此頁面
概覽 資料 認證 {0} 下載 相關產品 Family
PDF 格式規格書 下載
比較
書籤
設定
產品編號 750-8203
產品編號 750-8203

控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色

控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色
控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色
控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色
控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色
控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色 控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色 控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色 控制器 PFC200; 2 x ETHERNET, CAN, CANopen; 淺灰色
顏色:
PDF 格式規格書 下載
比較
書籤
設定

描述



PFC200 控制器是模組化 WAGO-I/O-SYSTEM的緊湊型 PLC。除了網路和通訊模組外，控制器還支援 750/753 系列中的所有數位、類比和特殊模組。

兩個 ETHERNET 介面和整合開關允許線上拓樸結構接線。

整合的 Web 伺服器提供使用者配置選項，同時顯示 PFC200 狀態資訊。

除了製程和樓宇自動化，PFC200 的典型應用包括標準機械和設備控制 (例如：包裝、裝瓶和製造系統，以及紡織、金屬和木材加工機器)。

符合 IEC 61131-3 的編程

  • 可透過 WAGO-I/O-PRO V2.3 或 e!COCKPIT 進行編輯
  • 直接連接 WAGO I/O 模組
  • 2 x ETHERNET (可配置)，CAN, CANopen
  • Linux 作業系統，帶 RT-Preemption 修補
  • 可透過 CODESYS, e!COCKPIT 或架構在 Web 的管理使用者介面進行配置
  • 免維護

產品細節

詳細資料

Technical Data

通訊 CANopen
Modbus TCP
Ethernet
Ethernet 通訊協議 DHCP
DNS
NTP
FTP
FTPS
SNMP
HTTP
HTTPS
SSH
圖形化 Web-Visu
操作系統 即時 Linux (帶 RT-修補)
CPU Cortex A8, 600 MHz
編程語言，符合 IEC 61131-3 指令表 (IL)
梯形圖 (LD)
功能塊圖 (FBD) (連續功能圖 (CFC))
結構化文字 (ST)
順序功能圖 (SFC)
編程環境 e!COCKPIT ( CODESYS 3 架構)
WAGO-I/O-PRO V2.3 (基於 CODESYS 2.3)
設定選項 e!COCKPIT
WAGO-I/O-CHECK
Web 管理
e!RUNTIME 資料庫
CODESYS 資料庫
Baud rate (communication/fieldbus 1) 10/100 Mbit/s
Baud rate ETHERNET: 10/100 Mbit/s
Transmission medium (communication/fieldbus) ETHERNET: 雙絞線 S-UTP, 100 Ohm, Cat.5; 100 m 最大電纜長度
主記憶體 (RAM) 256 MB
記憶體（快閃記憶體） 256 MB
附加存儲硬體 128 Kbytes
Program memory CODESYS V2: 16 MB; e!RUNTIME: 60 MB (Program and data memory (dynamically distributed))
Data memory CODESYS V2: 64 MB; e!RUNTIME: 60 MB Program and data memory (dynamically distributed)
剩餘儲存軟體 128 Kbytes
記憶體卡類型 SD 和 SDHC 可達 32 GB（所有保證只針對 WAGO 758－879/000－001 存儲卡適用）。
記憶卡插槽 推式機制,密封蓋
每個節點的模組數 (最大) 250
最大不帶匯流排延伸模組數量 64
最大輸入和輸出處理映像 1000 Worte/1000 Worte
最大輸入和輸出處理映像（MODBUS） 1000 Worte/1000 Worte
最大輸入和輸出處理映像（CAN） 2000 Worte/2000 Worte
指示器 LED (SYS, RUN, I/O, U1 … U6) 紅色/綠色/橙色：系統狀態、程式、內部資料匯流排、CANopen、使用者可編程的狀態 (可透過 CODESYS 資料庫使用)；LED (A, B) 綠色：系統電源狀態,現場供電
系統電源電壓 DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection)
在額定負載 (24 V) 時的輸入電流標準值 550 mA
系統電源的總電流 1,700 mA
現場電源電壓 DC 24 V (-25 … +30 %); via power jumper contacts
電源接點的電流承載能力 10 A
輸出電源跨接接點數 3
隔離 500 V 系統/電源

連接資料

連接技術: 通信 /  通訊總線 CANopen: 1 x D-Sub 9 連接器; Modbus TCP/UDP: 2 x RJ-45
Connection technology: system supply 2 x CAGE CLAMP®
Connection technology: field supply 6 x CAGE CLAMP®
連接類型 (1) System/field supply
單芯導線 0.08 … 2.5 mm² / 28 … 14 AWG
細多芯導線 0.08 … 2.5 mm² / 28 … 14 AWG
剝線長度 8 … 9 mm / 0.31 … 0.35 英寸
Connection technology: Device configuration 1 x 4-極針型連接器

幾何數據

寬度 78.6 mm / 3.094 inch
高度 71.9 mm / 2.831 inch
距離 DIN-35 軌道上緣的高度 64.7 mm / 2.547 inch
深度 100 mm / 3.937 inch

機械資料

重量 208.7 g
顏色 淺灰色
外盒材料 Polycarbonate, polyamide 6.6
一致性標記 CE

環境條件

(工作) 環境溫度 0 … 55 °C
(存儲) 環境溫度 -40 … 85 °C
保護等級 IP20
污染等級 (5) 2 per IEC 61131-2
操作高度 不降低溫度額定值:0–2000 m；降低溫度額定值:2000–5000 m (0.5 K/100 m)；最大：5000 m
相對空氣濕度（無冷凝） 95 %
安裝位置 任何
安裝類型 DIN-35 軌道
震動阻抗 4g per IEC 60068-2-6
抗衝擊性 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2, marine applications
EMC:　 - 輻射干擾 acc. to EN 61000-6-3, marine applications
暴露的污染 Per IEC 60068-2-42 and IEC 60068-2-43
火災負載 0.485 MJ
在相對濕度 75% 時允許汙染物濃度 H2S 10 ppm
在相對濕度75％的情況下允許的污染物濃度SO2 25 ppm

商業資料

Product Group 15 (Remote I/O)
包裝類型 BOX
Country of origin DE
GTIN 4050821739470
Customs Tariff No. 85371091990

認證/證書

Ex-Approvals

認證
其他認證資訊
認證名稱
語言
下載
認證 : ATEX
TUEV Nord Cert GmbH
其他認證資訊 EN 60079-0
認證名稱 : TUEV_14_ATEX_148929_X
認證 : IECEx
TUEV Nord Cert GmbH
其他認證資訊 IEC 60079-0
認證名稱 : IECEx_TUN_14.0035_X

Country specific Approvals

認證
其他認證資訊
認證名稱
語言
下載
認證 : KC
National Radio Research Agency
其他認證資訊 Article 58-2, Clause 3
認證名稱 : MSIP-REM-W43-PFC750

Ship Approvals

認證
其他認證資訊
認證名稱
語言
下載
認證 : ABS
American Bureau of Shipping
其他認證資訊 -
認證名稱 : 19-HG1821926
認證 : DNV GL
Det Norske Veritas, Germanischer Lloyd
其他認證資訊 -
認證名稱 : TAA0000194
認證 : LR
Lloyds Register
其他認證資訊 -
認證名稱 : 02/20026 (E6)
認證 : PRS
Polski Rejestr Statków
其他認證資訊 -
認證名稱 : TE/2236/880590/19

UL-Approvals

認證
其他認證資訊
認證名稱
語言
下載
認證 : UL
UL International Netherlands B.V. (ORDINARY LOCATIONS)
其他認證資訊 UL 508
認證名稱 : E175199 Sec.1

下載

Documentation

Manual

WAGO MODBUS Master Configurator
for configuration of MODBUS networks in WAGO-I/O-PRO (CODESYS)
V 1.1.0
PFC200 CS 2ETH CAN
PLC – PFC200 Controller
V 3.5.0 , 2019/7/24

Tutorial

Set IP address with Ethernet Settings
In this video we are demonstrating how you can set a IP address with Ethernet Settings. Content: 00:27 – Chapter #1 Download and install software; 00:56 – Chapter #2 Open Ethernet Settings; 01:10 – Chapter #3 Establish serial Connection; 01:34 – Chapter #4 Set IP address; 02:10 – Chapter #5 Check IP address
3.0 , 2017/12/18
Establish connection to a controller using SSH
In this video we are demonstrating how to establish a SSH connec-tion with a controller using for example PuTTY to be able to work with the LINUX console. Contents: 0:21 Download and install the SSH client; 0:40 Establish the SSH connection; 0:50 Log on to the Controller
1.0 , 2017/8/5

Additional Information

Disposal; Electrical and electronic equipment, Packaging
V 1.0.0

System Description

Design Notes
Basic conditions and recommendations for higher operational safety
V 2.0.0
Controller PFC100/200, General Product Information
Overview on WAGO-I/O-SYSTEM 750 approvals

Application Notes

Application Note CoDeSys 2.3

Anwendungshinweis für die Steuerung eines Igus robolink
Der Anwendungshinweis beschreibt anhand einer Demoapplikation die Steuerung eines Igus robolink® Roboterarms mit sechs Achsen. Als Steuerung wird ein Wago PFC200 (Art.-Nr. 750-8202) verwendet.
12.11.2015 , 2015/11/12
Application Note Weather Station Elsner P03 Modbus
This application note describes how communication can be set up between the WAGO I/O System and the ELSNER P03/3 weather station with a Modbus interface.
01.12.2011 , 2011/10/28
Connection of a Thermokon Thanos SR L MODBUS room control unit to the WAGO-I/O-SYSTEM
The fundamental method of setting up communication between the WAGO I/O System and the Thanos SR L MODBUS room operating panel from Thermokon is described in this application note.
02.05.2013 , 2013/5/13
Application Note Library ModuleAccess_01
These instructions describe the use of the ModuleAccess_01.lib library using 4 examples.
2016/1/29
Connection of Thermokon Multi-function room control units WRF 06
The fundamental method of setting up communication between the WAGO I/O System and the multi-function room operating panel (WRF06 RS485 Modbus) from Thermokon is described in this application note.
2016/4/8
Application Note: MpBus_03 Library
This Application Note explains how a WAGO fieldbus controller sets up communication to the MP-bus actuators via the MP-bus master module (750-643).
2019-10-29 , 2019/10/29
Application Note: DMX_02
This application note describes how a DMX master for DMX device control can be performed via 750-652 serial interface.
26.04.2017 , 2017/4/26
Connection of DMX devices to the WAGO-I/O-SYSTEM via the ArtNet-DMX STAGE-PROFI 1.1
This application note describes connecting the ArtNet-DMX STAGE-PROFI 1.1 to the WAGO-I/O-SYSTEM. The ArtNet-DMX STAGE-PROFI 1.1 can be operated as a DMX master and a DMX slave.
11.01.2013 , 2013/1/11
Application Note Library WagoDatalogger_02
This application note describes the use of the WagoDatalogger_02.lib library. Up to 80 analog or digital signals can be recorded.
10.03.2016 , 2016/4/4
Application note: DALI 753-647 Configuration Interface
This application note describes the WAGO DALI Configurator, the integration of the DALI visualization for configuring various sensor types and the implementation in a program.
V1.0.2 , 2019/4/29
HLK-Anlagenmakros für TRIC
In dieser Zip-Datei finden Sie Vorlagen und Makros für die Planungssoftware TRIC. TRIC ist ein Werkzeug für Planer und Errichter von HLK-Anlagen, das den Richtlinien der VOB, VDI und DIN EN ISO entspricht.
2015/7/10
Application Note PowerMeasurement_03 Library
This application note describes how current, voltage, effective power, power factor and energy consumption can be measured using 3-phase power measurement modules (750-493).
19.01.2011 , 2012/3/19
Application Note: EnOcean_06 Library
This application note describes how communication between the WAGO-I/O-SYSTEM and different EnOcean wireless sensors can be implemented using the EnOcean_06.lib library.
30.11.2016 , 2016/11/30
Application Note for the 750-495 3-Phase Power Measurement Module
The application note for the 3-Phase Power Measurement Module 750-495 shows how the measured values ​​of the power measurement module can be read. It is also shown how the power module can be configured using the WAGO-I/O-PRO- V2.3 visualization tool.
24.01.2014 , 2014/1/24
HVAC System Macros
WAGO provides system macros for HVAC applications that are based on Building_HVAC_03.lib.
10.03.2017 , 2019/3/15
Anbindung der HKW-Elektronik Wetterprognose-Station WS-K xx T ModBus
Dieser Anwendungshinweis beschreibt, wie die Kommunikation zwischen dem WAGO-I/O-System und einer HKW-Elektronik Wettterprognose-Station Kompakt realisiert werden kann.
V 1.1 , 2017/7/7
Application Note Scheduler_03.lib
This application note describes different applications of the Scheduler_03.lib library.
2011/5/20
HART Tool Routing via ETHERNET with
750-820x/750-88x and CODESYS 2.3 (a116120)
This application note describes how to set up asset management systems, which facilitate simple, efficient configuration of HART field devices.
With the Cerabar PMC51 (Endress+Hauser) as an example, a connection is established from any HART sensor to a WAGO PROFIBUS Controller and a WAGO ETHERNET Fieldbus Coupler. The configuration is made with the asset management software WAGOframe, PACTware und FieldCare.
1.0.0 , 2019/3/22
WagoConfigToolLIB
The library WagoConfigToolLIB.lib library provides function blocks for accessing the device configuration (e.g., network settings, data and time, ongoing services).
1.0.0
Application note Cloud Connectivity
This application note explains how the WAGO controllers PFC100 and PFC200 can communicate with cloud services like Microsoft Azure (WAGO Cloud), Amazon AWS and IBM Bluemix. Data could be send to the cloud and commands could receive from the cloud. The libraries WagoLibCloud for WAGO-I/O-PRO V2.3 and WagoAppCloud for e!COCKPIT are used.
2019-09-17 , 2019/9/17
Application Note Connecting with an iPod Touch
This Application Note explains the basic procedures for access to the WAGO Ethernet Controller 750-8xx or the WAGO Ethernet Coupler 750-3xx using an iPod Touch.
30.03.2011 , 2011/10/28
GRUNDFOS GENIbus interface, application note
This application note describes how communication between the WAGO-I/O-SYSTEM and the Grundfos MAGNA series circulation pumps can be performed via GENIbus interface.
20.03.2017 , 2017/3/20
ModuleAccess_01.lib
The ModuleAccess_01 library provides both module configuration and access to its process data within a CoDeSys project without the use of WAGO I/O Check.
1.7 , 2018/1/18
Connection of Thermokon Multi-function room control units WRF 08
The fundamental way of carrying out the communication between the WAGO I/O System and the multi-function room operating panel (WRF08 RS485 Modbus) from Thermokon is described in this application note.
2019/4/10
Application Note for the 750-494 3-Phase Power Measurement Module
The application note for the 3-Phase Power Measurement Module 750-494 shows how the measured values ​​of the power measurement module can be read. It is also shown how the power module can be configured using the WAGO-I/O-PRO- V2.3 visualization tool.
24.01.2014 , 2014/11/11
Application Note Data Plotter
The Data Plotter is a Web application that can be used as a visualization tool for the data logger. It allows the user to graphically display data captured by the data logger library (WAGO_Datalogger_02.lib for CODESYS V2.3 and WagoAppDatalogger for e!COCKPIT from V1.2.100.6023).
V 2019-07-04 , 2019/7/5
Application note for installing a MySQL-Server on a PFC-Controller
This Application Note explains how a MySQL-Server can be set up and used on a PFC 200. The Application shows how measurement values of the 3-Phase Power Measurement Module can be written into a database.
V 1.0.4 , 2019/5/16
V 1.0.4 , 2019/5/16

Application Note e!COCKPIT

e!COCKPIT application note WagoAppCloud
This application note explains how the WAGO controllers PFC100 and PFC200 can communicate with cloud services like Microsoft Azure (WAGO Cloud), Amazon AWS and IBM Bluemix. Data could be send to the cloud and commands could receive from the cloud. The libraries WagoLibCloud for WAGO-I/O-PRO V2.3 and WagoAppCloud for e!COCKPIT are used.
2019-10-21 , 2019/10/21
HART Tool Routing via ETHERNET with 750-820x and e!RUNTIME (a116130)
This application note describes how to set up asset management systems, which facilitate simple, efficient configuration of HART field devices.
With the Cerabar PMC51 (Endress+Hauser) as an example, a connection is established from any HART sensor to a WAGO PROFIBUS Controller and a WAGO ETHERNET fieldbus coupler. The configuration is made with the asset management software WAGOframe, PACTware und FieldCare.
1.0.0 , 2019/3/22
SNMP Communication (a500850)
This application note explains how the WAGO controllers PFC100 andPFC200 can communicate via SNMP: Sending traps / inform notifications, creating an MIB and using the controller as an SNMP agent. To do so, the SNMP-specific libraries for WAGO-I/O-PRO V2.3 and e!COCKPIT are used.
V1.1.0 , 2019/8/19
eCOCKPIT application note installation MySQL-Server
This Application Note explains how a MySQL-Server can be set up and used on a PFC 200. The Application shows how measurement values of the 3-Phase Power Measurement Module can be written into a database.
2019-09-09 , 2019/9/9

Libraries

Library

WagoLibCpuUsage
This library enables you to determine the CPU load (usage).
1.0.0
WagoCANLayer2_01
This library provides function blocks that enable CAN-Layer-2 communication to be established using 11-bit and 29-bit identifiers.
1.0.1
WagoCANLayer2_02
This library provides function blocks that enable CAN-Layer-2 communication to be established using 11-bit and 29-bit identifiers.
1.0.0
WAGO_Datalogger_02.lib
The FbDatalogger function block logs entries from up to 80 channels at an interval of min. one second in a CSV file.
2.4 , 2017/11/13
WagoConfigToolLIB
The library WagoConfigToolLIB.lib library provides function blocks for accessing the device configuration (e.g., network settings, data and time, ongoing services).
1.0.0
WagoLibDiagnosticIDs
This library is used to take part in an internal diagnostics protocol via an IEC-61131 application. You can define your own IDs and provide your own texts for this. You can also transmit your own diagnostics IDs. Diagnostics generated in this manner are saved in the system log and displayed in text form, for example, in the WBM.
1.0.0
ModuleAccess_01.lib
The ModuleAccess_01 library provides both module configuration and access to its process data within a CoDeSys project without the use of WAGO I/O Check.
1.7 , 2018/1/18
WagoLibLed
This library contains function blocks that can be used for control and querying of the user LEDs and for querying of the status LEDs. Depending on the device design, not all of the user or status LEDs may be provided.
1.0.0
WagoLibNetSnmpManager
The “WagoLibNetSnmpManager.lib” library is used to implement SNMP manager functions. This makes it possible to access other SNMP agents as well as call and modify OIDs via an IEC program.
1.1.0
WagoCANopen_02
This library provides function blocks for communication via CANopen.
1.0.1
Library WagoLibCloud_02.lib
Die Bibliothek dient zur Kommunikation des WAGO Controller PFC100 und PFC200 mit Cloud Diensten wie Microsoft Azure (WAGO Cloud), Amazon AWS and IBM Bluemix. Daten können zur Cloud gesendet und Kommandos von der Cloud empfangen werden.
V2.2.3 , 2019/4/29
WagoLibFTPS_01
This library provides a function block for FTP and FTPS communication. FTPS supports explicit and implicit TLS encryption:
- Explicit FTP over TLS: Client explicitly asks for TLS encryptions by issuing the command "AUTH TLS" (Described in RFC4217)
- Implicit FTP over TLS: Client tries to establish an TLS connection immediatelly.
V 1.15

Engineering-Software

e!COCKPIT

e!COCKPIT
免費30天試用編輯軟體請在此註冊
V 1.6 , 2019/9/30

Configuration and Commissioning Software

WAGO-IO-PRO Demo-Version (759-912) / Serie 750, 758 und 762
2.3.9.55 , 2015/7/3

Runtime Software

Linux® Toolchain

Linux® 板支持包（BSP）
使用 Wago PFC BSP，Wago 為 Linux® 愛好者提供了自己編譯 PFC 固件並根據自己的意願進行延伸的機會。

Wago PFC BSP 包括為 PFC 最佳化的 Pengtuonix 構建環境和 OSELAS 工具鏈，除其他外，OSELAS 提供了以下可能性：

  • 使用 Python、SQLite 3、PHP 等開源套裝軟體延伸固件功能。
  • 通過直接或間接匯流排訪問本地匯流排、CANopen 或 PROFIBUS，編寫自己的 C/C+ 應用程式。
  • 編寫外部 CODESYS V2 庫以延伸 PLC 應用
  • 其中許多任務都有詳細的說明 (請參閱「如何操作」)。
2018.2.8.FW(11)35 , 2018/8/27

Firmware

Firmware: 750-8203 Controller PFC200; 2 x ETHERNET, CAN, CANopen; light gray
14 , 2019/9/27

IoT/ Cloud

Cloud Connectivity

雲連接測試版本
自從2018年1月起，第11版韌體已支援雲端連接功能。所有 WAGO PFC 控制器皆已具備 IoT 功能，資料可以透過 MQTT 直接從現場端傳送至雲端 在此可以蒐集並分析資料 新功能會以測試版提供 免費試用最新的測試功能請在此註冊
2019/6/4

CAD/CAE-Data

CAD data

2D/3D Models 750-8203

CAE data

EPLAN Data Portal 750-8203
WSCAD Universe 750-8203

Device Files

Device Description File

750-914; EDS file for CANopen / 750, 752 and 767 Series
XR , 2019/7/30

Device Driver

750-914; EDS file for CANopen / 750, 752 and 767 Series
XR , 2019/7/30

相容產品

導軌

鋼製導軌; 35 x 7.5 mm; 厚度1 mm; 长度 2 m; 带孔; 符合 EN 60715; "孔宽25 mm
產品編號: 210-112
鋼製導軌; 35 x 7.5 mm; 厚度1 mm; 长度 2 m; 带孔; 符合 EN 60715; "孔宽25 mm
Accessories > 產品編號 210-112

鋼製導軌

PU (SPU): 10 (1) Piece
您輸入的值已四捨五入。
庫存不足 SPU 數量!
此項目已添加，不會再次添加。如有需要，請直接在商品上調整數量。
無效輸入
10
鋼製導軌; 35 x 7.5 mm; 厚度1 mm; 长度 2 m; 不带孔; 符合 EN 60715
產品編號: 210-113
鋼製導軌; 35 x 7.5 mm; 厚度1 mm; 长度 2 m; 不带孔; 符合 EN 60715
Accessories > 產品編號 210-113

鋼製導軌

PU (SPU): 10 (1) Piece
您輸入的值已四捨五入。
庫存不足 SPU 數量!
此項目已添加，不會再次添加。如有需要，請直接在商品上調整數量。
無效輸入
10
鋼製導軌; 35 x 15 mm; 厚度1.5 mm; 长度 2 m; 不带孔; 類似於 EN 60715
產品編號: 210-114
鋼製導軌; 35 x 15 mm; 厚度1.5 mm; 长度 2 m; 不带孔; 類似於 EN 60715
Accessories > 產品編號 210-114

鋼製導軌

PU (SPU): 10 (1) Piece
您輸入的值已四捨五入。
庫存不足 SPU 數量!
此項目已添加，不會再次添加。如有需要，請直接在商品上調整數量。
無效輸入
10
顯示較少 顯示更多

通用附件

顯示較少 顯示更多

標記附件

顯示較少 顯示更多

記憶卡

顯示較少 顯示更多

屏蔽线/连接器过渡线

顯示較少 顯示更多

軟體

顯示較少 顯示更多

系統防護外殼

顯示較少 顯示更多

電纜和插拔式連接器

顯示較少 顯示更多

產品系列

Controller 750
顯示該系列的所有產品。