Item no. 753-648

LON®-FTT Interface; -

Stock item
Please wait ...
List price per piece*
On request
Price and availability after Login
Your price per piece*
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input

The 753-648 LON FTT Module complies with the ISO/IEC 14908 standard. The 1⁄2 inch (12 mm) wide module connects LON to 750 Series Controllers and I/O Modules (e.g., BACnet, KNX, EnOcean, DALI, MODBUS). It is a full-fledged and flexible LON device within LonWorks FT or LP networks. The module's network variable interface defines 249 network variables of any type and supports both LonMark objects and configuration properties.

LON network interface is defined via LON Configurator. This comprehensive and easy-to-use software tool is a part of the WAGO-I/O-PRO Software. Interface representations are programmed via IEC-61131-3 and can be easily used for further applications.

Fieldbus nodes are programmed via WAGO-I/O-PRO Software. WAGO provides a comprehensive IEC-61131-3 library of function blocks, simplifying the creation of complex control applications.

A maximum of two modules may be connected to one controller. However, the number of modules depends on the memory required by the IEC application and the type of controller. The module is supplied via 24 V power jumper contacts.

Product details

Technical Data
Device-specific Number of network variables: max. 254 (249 for application)
Topology per LON specification
Number of aliases (max.) 127
Baud rate -
Bus segment length (max.) 2700 m; 500 m (free topology); 2700 m (bus topology)
Transmission medium Twisted pair - FTT
Transmission channel 1
Data width 24-byte data
Commissioning via WAGO-I/O-CHECK or WAGO-I/O-PRO V2.3
Supply voltage (system) DC 5 V; via data contacts
Power consumption (5 V system supply) 30 mA
Supply voltage (field) DC 24 V; via power jumper contacts (power supply via blade contact; transmission via spring contact)
Isolation 500 V system/field
Number of incoming power jumper contacts 2
Number of outgoing power jumper contacts 2
Connection data
Connection technology: inputs / outputs 8 x CAGE CLAMP®
Connection type (1) Inputs/Outputs
Solid conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 14 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch
Geometrical Data
Width 12 mm / 0.472 inch
Height 100 mm / 3.937 inch
Depth 69 mm / 2.717 inch
Depth from upper edge of DIN-rail 61.8 mm / 2.433 inch
Mechanical data
Mounting type DIN-35 rail
Pluggable connector yes
Material Data
Housing material Polycarbonate, polyamide 6.6
Fire load 0.957 MJ
Weight 54.8 g
Conformity marking CE
Environmental Requirements
Surrounding air temperature (operation) 0 … 55 °C
Surrounding air temperature (storage) -40 … 85 °C
Protection type IP20
Pollution degree (5) 2 per IEC 61131-2
Operating altitude 0 … 2000 m
Mounting position horizontal (standing/lying); vertical
Relative humidity (without condensation) 95 %
Vibration resistance per IEC 60068-2-6
Shock resistance 15g per IEC 60068-2-27
EMC immunity to interference per EN 61000-6-2
EMC emission of interference per EN 61000-6-3
Exposure to pollutants Per IEC 60068-2-42 and IEC 60068-2-43
Permissible pollutant concentration H2S at a relative humidity < 75% 10 ppm
Permissible pollutant concentration SO 2 at a relative humidity < 75% 25 ppm
Commercial data
Product Group 15 (Remote I/O)
Packaging type BOX
Country of origin DE
GTIN 4050821475705
Customs tariff number 85389099990
Approvals / Certificates
Additional Approval Text
Certificate name
Approval: UL
Underwriters Laboratories Inc. (HAZARDOUS LOCATIONS)
Additional Approval Text UL 121201
Certificate name: E198726 Sec.1
Country specific Approvals
Additional Approval Text
Certificate name
Approval: KC
National Radio Research Agency
Additional Approval Text Article 58-2, Clause 3
Certificate name: MSIP-REM-W43-MSM750
CAD files
CAD data
2D/3D Models 753-648
CAE data
EPLAN Data Portal 753-648
WSCAD Universe 753-648
ZUKEN Portal 753-648
Compatible products
Product family
Couplers & I/O modules: