WINSTA® MIDI Item no. 770-102/041-000
Details
Description
Downloads
Approval
Related products
Knowledge/FAQ
Buy now
Electrical data
Connection data
Physical data
Mechanical data
Plug-in connection
Material data
Environmental requirements
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
17 elements
Item no.: 770-112/041-000
Plug; with strain relief housing; 2-pole; Cod. A; 4,00 mm²; black
Item no.: 210-702
Marking strips; for Smart Printer; permanent adhesive; 15 mm; 50 m on roll; white
Item no.: 210-802
Type labels; 70 x 33 mm; silver-colored
Item no.: 210-870
Marking strips; for Smart Printer; permanent adhesive; 10 mm; whiteItem no.: 210-873
Marking strips; for Smart Printer; permanent adhesive; 20 mm; silver-colored
Item no.: 221-413
COMPACT splicing connector; 3-conductor; with operating levers; 12 AWG; transparent housing
Item no.: 248-503
Mini-WSB marking card; as card; MARKED; 11 ... 20 (10x); not stretchable; Horizontal marking; snap-on type; white
Item no.: 249-116
Screwless end stop; 6 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
Item no.: 289-575
Interface module; with solder pin; Female connector; 9-pole; Mating connector with solder connection; Vertical mounting; PCB terminal blocks, double-row; in mounting carrier; 2,50 mm²
Item no.: 289-624
Interface module; with solder pin; Female connector; 37-pole; Mating connector with solder connection; Vertical mounting; Triple-deck PCB terminal blocks; in mounting carrier; with shield connection; 2,50 mm²
Item no.: 289-720
Interface module; with solder pin; Male connector; 9-pole; Double-deck PCB terminal blocks; in mounting carrier; Mating connector for solder connection; 2,50 mm²Item no.: 289-722
Interface module; with solder pin; Male connector; 25-pole; Double-deck PCB terminal blocks; in mounting carrier; Mating connector for solder connection; 2,50 mm²
Item no.: 769-104/021-000
1-conductor female connector; CAGE CLAMP®; 4 mm²; Pin spacing 5 mm; 4-pole; coding finger; Lateral locking levers; 4,00 mm²; gray
Item no.: 770-101
Locking lever; for flying leads; for manual operation; black
Item no.: 770-103
Socket; with strain relief housing; 3-pole; Cod. A; 4,00 mm²; black
Item no.: 770-104
Socket; with strain relief housing; 4-pole; Cod. A; 4,00 mm²; black
Item no.: 859-752
Optocoupler module; Nominal input voltage: 5 VDC; Output voltage range: 20 … 30 VDC; Limiting continuous current: 0.5 A; 3-wire connection/high-side switching; Frequency: 10 kHz; Red status indicator; Module width: 6 mm; gray