Item no. 787-1226

EPSITRON® COMPACT power supply; single-phase; output voltage 24 VDC; 6 A; with pluggable picoMAX connector

Stock item
Please wait ...
Stock item
List price per piece*
On request
Price and availability after Login
Your price per piece*
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Features:
  • Switched-mode power supply
  • Stepped profile for installation in standard distribution boards
  • Screw mounts for alternative installation in distribution boxes or devices
  • Pluggable picoMAX® Connection Technology (tool-free)
  • Suitable for both parallel and series operation
  • Electrically isolated output voltage (SELV) per EN 60335-1 and UL 60950-1; PELV per EN 60204

Product details

Details
Technical Data
Input
Phases 1
Nominal input voltage Ui nom AC 100 … 120 V; AC 200 … 240 V
Input voltage range AC 90 … 132 V; AC 180 … 264 V; DC 250 … 375 V
Input voltage derating -2 %/V (< 100 VAC)
Nominal mains frequency range 47 … 63 Hz; 0 Hz
Input current Ii ≤ 3,8 A
Discharge current ≤ 0,25 mA
Inrush current ≤ 20 A
Power factor ≥ 0,5
Power factor correction (PFC) Passive
Mains failure hold-up time ≥ 30 ms
Output
Nominal output voltage Uo nom DC 24 V (SELV)
Output voltage range DC 22 … 26 V (adjustable)
Default setting DC 24 V
Nominal output current Io nom 6 A; 4,8 A (< 110 VAC)
Nominal output power 150 W
Control deviation ≤ 1 %
Deviation, dynamic load change 10 … 90 % ≤ 1 %
Residual ripple ≤ 100 mV (peak-to-peak)
Overload behavior Constant power (in overload range: 1.05 … 1.35 x Io nom); Shutdown and automatic restart in the event of a short circuit or permanent overload
Signaling and communication
Signaling 1 x LED DC OK (green)
Operation status indicator Green LED (Uo)
Efficiency/Power losses:
Power loss Pl ≤ 0,4 W (230 VAC; No load)
Power loss (max.) Pl (max.) 16,5 W (100 VAC / 24 VDC; 6 A)
Efficiency (typ.) 90 % (230 VAC); 89 % (110 VAC)
Fuse protection:
Internal fuse T 3.15 A / 500 VAC
Required backup fusing An external DC fuse is required for the DC input voltage.
Recommended backup fusing Circuit breaker: 6 A (C characteristic), 10 A (B characteristic) or higher
Safety and protection:
Isolation voltage (Pri.-Sec.) DC 4,242 kV
Protection class I
Protection type IP20 (per EN 60529)
Resistance to reverse feed ≤ DC 35 V
Transient suppression (primary) Varistor
Overvoltage protection; secondary ≤ 31 VDC (in the event of a fault)
Short-circuit-protected Yes
Open-circuit-proof Yes
Parallel operation Yes
Series operation Yes
MTBF > 500,000 h (per IEC 61709)
Connection data
Connection type (1) Input/Output
Connection technology Push-in CAGE CLAMP®
WAGO Connector picoMAX® 5.0, WAGO 2092 Series
Solid conductor 0,2 … 2,5 mm² / 24 … 12 AWG
Fine-stranded conductor 0,2 … 2,5 mm² / 24 … 12 AWG
Strip length 9 … 10 mm / 0.35 … 0.39 inch
Geometrical Data
Width 144 mm / 5.669 inch
Height 90 mm / 3.543 inch
Depth 56 mm / 2.205 inch
Depth from upper edge of DIN-rail 52,5 mm / 2.067 inch
Note (dimensions) Depth: 48 mm (without front panel)
Mechanical data
Mounting type DIN-35 rail (EN 60715)
Screw mount (back)
Material Data
Flammability class per UL94 V0
Weight 510 g
Environmental Requirements
Surrounding air temperature (operation) -25 … 70 °C
Surrounding air temperature (storage) -40 … 85 °C
Relative humidity ≤ 95% (no condensation permissible)
Derating -2.66 %/K (> 55 °C)
Pollution degree 2
Climatic category 3K3 (per EN 60721; except for low air pressure)
Standards and specifications
Conformity marking CE
Standards/specifications EN 61204-3; EN 60335-1; EN 62368-1 ; UL 60950-1; UL 508
Commercial data
Packaging type BOX
Country of origin CN
GTIN 4055143415040
Customs tariff number 85044082900
Approvals / Certificates
UL-Approvals
Approval
Additional Approval Text
Certificate name
Language
Approval: UL
Underwriters Laboratories Inc.
Additional Approval Text UL 60950-1
Certificate name: E255815
Approval: UL
Underwriters Laboratories Inc.
Additional Approval Text UL 508
Certificate name: E255817
Downloads
Documentation
CAD files
CAD data
2D/3D Models 787-1226
CAE data
EPLAN Data Portal 787-1226
WSCAD Universe 787-1226
ZUKEN Portal 787-1226
Compatible products
Strain relief
Item no.: 2092-1601
Gripping plate; light gray
Pluggable Connectors > Item no. 2092-1601
Gripping plate; light gray
PU (SPU): 100 (25) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
100
Product family