Stock item
Please wait ...
List price per piece
On request
Price and availability after Login
Your price per piece
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Item no. 787-822

EPSITRON® PRO Power supply; single-phase; output voltage 24 VDC; 5 A; PowerBoost

Stock item
Please wait ...
List price per piece
On request
Price and availability after Login
Your price per piece
On request
PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1

Description



Features:

  • Switched-mode power supply with PowerBoost and TopBoost
  • Stand-by input for switching off the output and minimizing power consumption
  • DC OK contact for output monitoring
  • Suitable for both parallel and series operation
  • Natural convection cooling when horizontally mounted
  • Enclosed for use in control cabinets
  • Electrically isolated output voltage (SELV) per EN 60950-1/UL 60950-1; PELV per EN 60204

Product details

Details

Technical Data

Input
Phases 1
Nominal input voltage Ui nom AC 100 … 240 V
Input voltage range AC 85 … 264 V; DC 120 … 373 V
Nominal mains frequency range 50 … 60 Hz; 0 Hz
Input current Ii ≤ 0,97 A (240 VAC; 5 ADC)
Discharge current ≤ 1 mA
Inrush current ≤ 30 A (peak)
Power factor correction (PFC) Passive
Mains failure hold-up time ≥ 35 ms (230 VAC)
Output
Nominal output voltage Uo nom DC 24 V (SELV)
Output voltage range DC 22 … 29,5 V (adjustable)
Factory preset DC 24 V
Nominal output current Io nom 5 A (24 VDC)
Nominal output power 120 W
Adjustment accuracy ≤ 1 %
Residual ripple ≤ 70 mV (peak-to-peak)
Current limitation 1.1 x Io nom (typ.)
Overload behavior TopBoost/PowerBoost/Constant current mode
PowerBoost DC 10 A (4 s); DC 7,5 A (8 s)
TopBoost DC 21 A (25 ms)
Signaling and communication
Signaling 1 x LED DC OK (green)
1 x Error LED (red)
1 x stand-by input
1 x DC OK relay contact (changeover contact)
Operation status indicator Green LED (DC OK)
Red LED (error)
Efficiency/Power losses:
Power loss Pl ≤ 0,5 W (Stand-by); ≤ 5 W (No load); ≤ 14,6 W (Nominal load)
Efficiency (typ.) 87,8 %
Fuse protection:
Internal fuse T 4 A / 250 VAC
External fuse (required) An external DC fuse is required for the DC input voltage.
External fuse (recommended) Circuit breaker: 6 A, 10 A, 16 A; Tripping characteristic: B or C
Safety and protection:
Insulation voltage (PRI-SEC) DC 4,242 kV
Isolation voltage (PRI-GND) DC 2,2 kV
Insulation voltage (SEC-GND) DC 0,7 kV
Protection class I
Protection class IP20 (per EN 60529)
Feedback voltage ≤ DC 35 V
Overvoltage category II
Transient protection, primary Varistor
Short circuit protection Yes
No-load proof Yes
Parallel operation Yes
Series connection Yes
MTBF > 500,000 h (per IEC 61709)

Connection data

Connection type (1) Input/Output
Connection technology CAGE CLAMP®
WAGO terminal WAGO 231 Series
Solid conductor 0,08 … 2,5 mm² / 28 … 12 AWG
Fine-stranded conductor 0,08 … 2,5 mm² / 28 … 12 AWG
Strip length 8 … 9 mm / 0.31 … 0.35 inch
Connection type (2) Signaling
Connection technology 2 CAGE CLAMP®
WAGO terminal 2 WAGO 733 Series
Solid conductor (2) 0,08 … 0,5 mm² / 28 … 20 AWG
Fine-stranded conductor (2) 0,08 … 0,5 mm² / 28 … 20 AWG
Strip length (2) 5 … 6 mm / 0.2 … 0.24 inch

Geometrical Data

Width 57 mm / 2.244 inch
Height 163 mm / 6.417 inch
Length from upper-edge of DIN-35 rail 163 mm / 6.417 inch
Note on dimensions Height with connector

Mechanical data

Type of mounting DIN-35 rail (EN 60715) in 2 positions

Material Data

Weight 1268 g

Environmental Requirements

Surrounding air (operating) temperature -25 … 70 °C (Device starts at −40 °C (type-tested))
Surrounding air (storage) temperature -25 … 85 °C
Relative humidity 5 … 96 % (no condensation permissible)
Derating -3 %/K (> 50 °C)
Pollution degree 2
Climatic category 3K3 (per EN 60721)

Standards and specifications

Conformity marking CE
Standards/specifications EN 60950; EN 61204-3; EN 61558-2-16; UL 60950; UL 508

Commercial data

Product Group 6 (Interface Electronics)
Packaging type BOX
Country of origin DE
GTIN 4045454993924
Customs Tariff No. 85044082900

Approvals / Certificates

UL-Approvals

Approval
Additional Approval Text
Certificate name
Language
Approval: UL
Underwriters Laboratories Inc.
Additional Approval Text UL 60950-1
Certificate name: E255815
Approval: UL
Underwriters Laboratories Inc.
Additional Approval Text UL 508
Certificate name: E255817

Compatible products

Marking accessories

Item no.: 2009-110
Marking strips; on reel; not stretchable; plain; snap-on type; white
Marking > Item no. 2009-110

Marking strips; on reel; not stretchable; plain; snap-on type; white

PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Item no.: 210-831
Marking strips; on reel; 2.3 mm wide; plain; Self-adhesive; white
Marking > Item no. 210-831

Marking strips; on reel; 2.3 mm wide; plain; Self-adhesive; white

PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1
Item no.: 210-832
Marking strips; on reel; 3 mm wide; plain; Self-adhesive; white
Marking > Item no. 210-832

Marking strips; on reel; 3 mm wide; plain; Self-adhesive; white

PU (SPU): 1 Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
1

Mounting adapter