The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Please wait ...
List price per piece
On request
Price and availability afterLogin
Your price per piece
On request
PU (SPU): 5 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
5
Item no. 289-966

Interface module with RJ-45 connectors and shield clamping saddle

Please wait ...
List price per piece
On request
Price and availability afterLogin
Your price per piece
On request
PU (SPU): 5 (1) Piece
The value you entered was rounded.
Not available for order under SPU!
The item is already added and will not be added again. If necessary, please adjust the quantity directly on the article.
Invalid input
5

Description



Short description:

Compatible on the field side with the 789-620, 789-621 and 789-622 Current Sensors.

Required terminal assignment:

2: + Supply

7: - Supply

4: D+

5: D-

Direct shield connection to the carrier rail via shield grounding foot.

Product details

Details

Electrical Data

Nominal current 1.5 A
Insulation resistance ≥ 500 MΩ
Specialty functions With shield connection
With shield clamping saddle

Safety and protection:

Dielectric strength contact-contact (AC, 1 min) 0.5 kVeff

Connection data

No. of poles 4
Connection type (1) System
No. of poles 1 4
Pluggable connector 2 x RJ-45 shielded
Connection type (2) Clamping units 2, 7
No. of poles 2 4
Design 2 PCB terminal blocks
Connection technology 2 CAGE CLAMP®
WAGO terminal 2 WAGO 236 Series
Solid conductor (2) 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor (2) 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length (2) 5 … 6 mm / 0.2 … 0.24 inch
Connection type (3) Clamping units 4, 5
No. of poles 3 2
Design 3 PCB terminal blocks
Connection technology 3 CAGE CLAMP®
WAGO terminal 3 WAGO 745 Series
Solid conductor (3) 0.2 … 6 mm² / 24 … 10 AWG
Fine-stranded conductor (3) 0.2 … 6 mm² / 24 … 10 AWG
Strip length (3) 11 … 12 mm / 0.43 … 0.47 inch
Note (conductor cross-section) 12 AWG: THHN, THWN
Mating cycles 500
Connecting cable assembled, shielded RJ-45 cable (recommended: UTP, STP)
WAGO shield (screen) clamping saddle 27 mm wide; cable diameter up to 24 mm

Geometrical Data

Width 69 mm / 2.717 inch
Height from upper-edge of DIN-35 rail 40 mm / 1.575 inch
Depth 85 mm / 3.346 inch

Mechanical data

Type of mounting DIN-35 rail
Housing design Mounting carrier

Material Data

Fire load 0 MJ
Weight 89.916 g

Environmental Requirements

Surrounding air (operating) temperature -20 … 85 °C

Commercial data

Product Group 6 (Interface Electronics)
Country of origin DE
GTIN 4050821001218

Downloads

Documentation

Additional Information