
Function:
The parameters for communication per the IEC 60870 Protocol can be set with a configurator integrated into the e!COCKPIT Software.
The configurator sets up IEC 60870 objects while configuring data exchange to the PLC application or I/O modules. Import and export functions in CSV format allow configured data to be transmitted to other engineering tools.
With this license, the IEC 60870-5-101 and -104 Protocols can be activated on the slave, and the protocol -103 activated on the master only. This permits the creation of gateways that convert one protocol into another, e.g., allowing protection devices to be read out via IEC 60870-5-103 and data to be transmitted to the network control system via IEC 60870-5-104.
The time on the telecontrol substation (slave) can be directly synchronized via either the IEC 60870 Protocol with object 103 or via (S)NTP.
IEC 60870-5-101/-104 Information Objects can be used to monitor the direction of single, double and step messages – bit patterns, counter values, as well as normalized, scaled and floating-point measurement values can also be used. All information objects can be transmitted with or without a time stamp. This also applies to information objects in the control direction.
An IEC 60870-5-104 Slave can simultaneously maintain up to four connections to the control system (master).
Your Benefits:
Use:
Enter the license into e!COCKPIT, assign it to a device and load both the license and project into the controller. No other installation steps are required.
Technical Data:
See Section “Functionality of the WAGO Protocol Library according to IEC 60870-5-101, and -104” in Product Manual “Planning DNP3/IEC-60870 with the Telecontrol Configurator and e!COCKPIT.“
The parameters for communication per the IEC 60870 Protocol can be set with a configurator integrated into the e!COCKPIT Software.
The configurator sets up IEC 60870 objects while configuring data exchange to the PLC application or I/O modules. Import and export functions in CSV format allow configured data to be transmitted to other engineering tools.
With this license, the IEC 60870-5-101 and -104 Protocols can be activated on the slave, and the protocol -103 activated on the master only. This permits the creation of gateways that convert one protocol into another, e.g., allowing protection devices to be read out via IEC 60870-5-103 and data to be transmitted to the network control system via IEC 60870-5-104.
The time on the telecontrol substation (slave) can be directly synchronized via either the IEC 60870 Protocol with object 103 or via (S)NTP.
IEC 60870-5-101/-104 Information Objects can be used to monitor the direction of single, double and step messages – bit patterns, counter values, as well as normalized, scaled and floating-point measurement values can also be used. All information objects can be transmitted with or without a time stamp. This also applies to information objects in the control direction.
An IEC 60870-5-104 Slave can simultaneously maintain up to four connections to the control system (master).
Your Benefits:
- Use the PFC200 Controller as a telecontrol substation (slave) on an IEC 60870-5-101/-104 Control System (master).
- Process data from one or more IEC 60870-5-103 Protection Devices (slaves) with the PFC200 Controller (master).
- Create a gateway application to transfer data from IEC 60870-5-103 Protection Devices to an IEC 60870-5-101/-104 Control System.
Use:
Enter the license into e!COCKPIT, assign it to a device and load both the license and project into the controller. No other installation steps are required.
Technical Data:
See Section “Functionality of the WAGO Protocol Library according to IEC 60870-5-101, and -104” in Product Manual “Planning DNP3/IEC-60870 with the Telecontrol Configurator and e!COCKPIT.“