WAGO-I/O-CHECK is an easy-to-use Windows application for the checking of inputs and outputs and the display of a WAGO-I/O-SYSTEM 750 node.
The software reads the configuration from the node and displays it as a graphic on the screen. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or type of sensors, can be made with certain interface, Pt100 and thermocouple terminal blocks.
The coupler must be connected at a vacant serial or USB port of the PC using the communication cable supplied in the kit with the system to enable communication between WAGO‐I/O‐CHECK and the coupler.