Item no. 210-250
Operating tool; for MCS MINI and MIDI with CAGE CLAMP® connection; red
Color: 
Details
Downloads
Knowledge/FAQ
Buy now
Mechanical data
Material data
Commercial data
Product classification
Environmental Product Compliance
Other customers also purchased
1 - 4 of 20
Item no.: 221-412
COMPACT splicing connector; 2-conductor; with operating levers; 12 AWG; transparent housing 
Item no.: 221-413
COMPACT splicing connector; 3-conductor; with operating levers; 12 AWG; transparent housing
Item no.: 221-415
COMPACT splicing connector; 5-conductor; with operating levers; 12 AWG; transparent housing
Item no.: 210-658
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured
Item no.: 2002-2292
TOPJOB®S end/intermediate plate; for 2002-22xx series terminal blocks; 0.8 mm wide; orange
Item no.: 2004-1292
End and intermediate plate; 1 mm thick; orange
Item no.: 2009-115
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white
Item no.: 211-835
Cable tie marker; for Smart Printer; for use with cable ties; 25 x 11 mm; white
Item no.: 2273-205
COMPACT PUSH WIRE® connector for junction boxes; 5-conductor; transparent housing; yellow face
Item no.: 258-5005
Thermal transfer ink ribbon; for Smart Printer; black
Item no.: 249-117
Screwless end stop; 10 mm wide; for DIN-rail 35 x 15 and 35 x 7.5; gray
Item no.: 249-119
Group marker carrier; gray
Item no.: 258-5000
Thermal transfer printer; Smart Printer; for complete control cabinet marking; 300 dpi; With marking material
Item no.: 258-5014
Thermal transfer ink ribbon; for Smart Printer; for self-laminating labels; black
Item no.: 280-677
4-conductor ground terminal block; 2.5 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; green-yellow
Item no.: 281-611
2-conductor fuse terminal block; with pivoting fuse holder; for 5 x 20 mm miniature metric fuse; without blown fuse indication; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; gray
Item no.: 711-192
Transformer fuse terminal block; for fuse 5 x 20 mm; CAGE CLAMP® connection for conductors; 15 mm wide; gray
Item no.: 713-127
Strain relief plate; for female connectors; 25 mm wide; 1 part; Pin spacing 3.5 mm; blackItem no.: 713-129
Strain relief plate; for female connectors; 53 mm wide; 1 part; Pin spacing 3.5 mm; black
Item no.: 721-102/026-000
1-conductor female connector; CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 2-pole; 100% protected against mismating; 2,50 mm²; light gray