The Way to Connect!

WAGO 221: New 6 mm²/10 AWG Connector

Pull the lever up, insert a conductor and push the lever back down – done. WAGO's 221 Series Splicing Connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors ranging from 0.14 to 6 mm² (24–10 AWG).

The Way to Connect!

WAGO 221: New 6 mm²/10 AWG Connector

Pull the lever up, insert a conductor and push the lever back down – done. WAGO's 221 Series Splicing Connectors easily, quickly and safely connect solid, stranded and fine-stranded conductors ranging from 0.14 to 6 mm² (24–10 AWG).

221 Series Splicing Connector for all conductor types ranging in size from 0.14 to 6 mm² (24–10 AWG)

  • Easily terminate conductors from 0.14 to 6 mm² (24–10 AWG)
  • Connect solid, stranded and fine-stranded conductors
  • Time savings for installers and device manufacturers
  • Quickly install devices with higher levels of power consumption
  • Safely install long cable runs with larger conductor cross-sections
  • Pull the lever up, insert a conductor and push the lever back down

The Unbeatable Advantages of the 221

Connection Area

Test Slot

Easier Actuation

Two Sizes for All Conductor Types

Quickly and easily connect all conductor types of different cross-sections using 2-, 3-, and 5-wire connectors. The original model connectors accommodate all conductor types ranging from 24 to 12 AWG, as well as fine-stranded conductors from 0.14 to 4 mm² and solid or stranded conductors from 0.2 to 4 mm². A 6 mm² (10 AWG) model connects all conductor types ranging from 0.5 to 6 mm² (20–10 AWG).

Two Test Slots

Now you can perform testing from two different sides with the new 221 Series – even when installed. The new 221 Series connectors carry two test slots: one in the conductor entry direction and one opposite of this. These easy-to-access test slots provide extremely convenient testing conditions – even after installation within widely varying applications. They also provide good contact for all standard test probes.

Extremely Easy to Use

WAGO's splicing connectors can be opened very easily and quickly. The levers of the 221 Series require less opening force, enabling fast, tool-free connections! The recessed grips on the side also prevent slipping and make it easier to hold the connector while inserting the conductor.

WAGO's 221 Series Connection Heroes – Success Stories of the COMPACT Splicing Connector

WAGO's 221 Series Connection Heroes – at 1846 m altitude

We are lighting up movie theaters – with WAGO's 221

Celebrating with WAGO's 221 – at the “Verlauf Dich Nicht” Open Air festival

All-Purpose Weapon for Connection Heroes – WAGO's 221

The Networked Market Garden – with WAGO's 221

The 112 Calls 221!

WAGO 221 – The Way to Connect!

WAGO 221 Series Application Examples

Internal wiring in a luminaire
Installation extension in a small distribution box
Speaker connection in a ceiling

WAGO's 221 Series Conquers Distribution Cabinets

The new mounting carriers are available for all 221 Series Splicing Connectors (2, 3 and 5 conductors) and can be installed either vertically or horizontally. Secure the carrier by simply snapping it onto the DIN-rail or using screws on smooth surfaces. Flexible mounting clamps simplify both connector insertion and removal.

Thanks to its convenient design, the new carrier is just as easy to use as a 221 splice. Conductors can be conveniently connected and removed before or after inserting a connector into the carrier. The design also ensures that a test slot is always accessible, making the carrier compliant with valid VDE standards. In addition, the carrier provides space for custom labeling.

221 Series Products